Vedi le specifiche per i dettagli del prodotto.
NGD18N40CLBT4
Product Overview
Category
The NGD18N40CLBT4 belongs to the category of power MOSFETs.
Use
It is used for high-power switching applications in various electronic circuits and systems.
Characteristics
- High voltage and current handling capability
- Low on-state resistance
- Fast switching speed
- Low gate drive power requirement
Package
The NGD18N40CLBT4 is typically available in a TO-252 package.
Essence
This MOSFET is essential for efficient power management and control in electronic devices and systems.
Packaging/Quantity
The NGD18N40CLBT4 is usually packaged in reels or tubes, with quantities varying based on manufacturer specifications.
Specifications
- Drain-Source Voltage (VDS): 400V
- Continuous Drain Current (ID): 18A
- On-State Resistance (RDS(on)): 0.14Ω
- Gate-Source Voltage (VGS): ±20V
- Total Gate Charge (Qg): 30nC
- Operating Temperature Range: -55°C to 175°C
Detailed Pin Configuration
The NGD18N40CLBT4 typically has three pins: 1. Gate (G) 2. Drain (D) 3. Source (S)
Functional Features
- High voltage tolerance
- Low conduction losses
- Fast switching characteristics
- Suitable for high-frequency operation
Advantages
- Efficient power handling
- Reduced heat dissipation
- Enhanced system reliability
- Suitable for high-power applications
Disadvantages
- Higher cost compared to lower-rated MOSFETs
- Requires careful consideration of driving circuitry
Working Principles
The NGD18N40CLBT4 operates based on the principles of field-effect transistors, where the application of a voltage at the gate terminal controls the flow of current between the drain and source terminals.
Detailed Application Field Plans
The NGD18N40CLBT4 is commonly used in: - Switch-mode power supplies - Motor control circuits - Inverters and converters - Electronic ballasts - Audio amplifiers
Detailed and Complete Alternative Models
Some alternative models to the NGD18N40CLBT4 include: - IRF840 - FDPF18N50 - STP16NF06L - AOD4184
In conclusion, the NGD18N40CLBT4 power MOSFET offers high-performance characteristics suitable for a wide range of high-power electronic applications, making it an essential component in modern electronic systems.
[Word count: 324]
Please let me know if you need any further information or modifications.
10 domande e risposte comuni relative all'applicazione di NGD18N40CLBT4 nelle soluzioni tecniche
Sure, here are 10 common questions and answers related to the application of NGD18N40CLBT4 in technical solutions:
Q: What is the maximum drain-source voltage rating of NGD18N40CLBT4? A: The maximum drain-source voltage rating of NGD18N40CLBT4 is 400V.
Q: What is the continuous drain current rating of NGD18N40CLBT4? A: The continuous drain current rating of NGD18N40CLBT4 is 18A.
Q: Can NGD18N40CLBT4 be used for high-frequency switching applications? A: Yes, NGD18N40CLBT4 is suitable for high-frequency switching applications.
Q: What is the typical on-resistance of NGD18N40CLBT4? A: The typical on-resistance of NGD18N40CLBT4 is 0.04 ohms.
Q: Is NGD18N40CLBT4 suitable for use in power supplies? A: Yes, NGD18N40CLBT4 is commonly used in power supply applications.
Q: Does NGD18N40CLBT4 require a heat sink for thermal management? A: It is recommended to use a heat sink for efficient thermal management when using NGD18N40CLBT4 in high-power applications.
Q: What is the maximum junction temperature of NGD18N40CLBT4? A: The maximum junction temperature of NGD18N40CLBT4 is 175°C.
Q: Can NGD18N40CLBT4 be used in automotive electronic systems? A: Yes, NGD18N40CLBT4 is suitable for use in automotive electronic systems.
Q: What type of packaging does NGD18N40CLBT4 come in? A: NGD18N40CLBT4 is available in a TO-252 package.
Q: Are there any specific ESD handling precautions for NGD18N40CLBT4? A: It is recommended to follow standard ESD handling precautions when working with NGD18N40CLBT4 to prevent damage to the device.