ON Semiconductor
L'immagine può essere rappresentativa.
Vedi le specifiche per i dettagli del prodotto.
NCP1200AD40R2G
vedi dettagli Schede tecniche

NCP1200AD40R2G

Overview

Category: Integrated Circuit (IC)

Use: Power Management

Characteristics: - High-performance current mode controller - Designed for offline flyback converters - Provides precise control of the output voltage and current - Offers protection features such as overvoltage, overcurrent, and overtemperature protection

Package: SOIC-8

Essence: The NCP1200AD40R2G is a highly efficient current mode controller used in power management applications. It enables precise control of output voltage and current in offline flyback converters.

Packaging/Quantity: The NCP1200AD40R2G is available in a standard SOIC-8 package. It is typically sold in reels containing 2500 units.

Specifications

  • Input Voltage Range: 8V to 20V
  • Output Voltage Range: 5V to 24V
  • Maximum Switching Frequency: 500 kHz
  • Operating Temperature Range: -40°C to +125°C
  • Maximum Duty Cycle: 75%
  • Quiescent Current: 4 mA

Pin Configuration

The NCP1200AD40R2G has the following pin configuration:

  1. VCC: Power supply input
  2. GND: Ground reference
  3. CS: Current sense input
  4. FB: Feedback input
  5. COMP: Compensation pin
  6. DRV: Gate driver output
  7. DRAIN: Power MOSFET drain connection
  8. VREF: Reference voltage output

Functional Features

  • Current mode control with adjustable slope compensation
  • Soft-start function for controlled startup
  • Overvoltage protection (OVP)
  • Overcurrent protection (OCP)
  • Overtemperature protection (OTP)
  • Under-voltage lockout (UVLO)
  • Leading-edge blanking (LEB) for improved noise immunity

Advantages and Disadvantages

Advantages: - High-performance current mode controller - Precise control of output voltage and current - Comprehensive protection features - Adjustable slope compensation for improved stability - Soft-start function for controlled startup

Disadvantages: - Limited maximum duty cycle of 75% - Requires external components for complete power management solution

Working Principles

The NCP1200AD40R2G operates on the principle of current mode control. It regulates the output voltage by adjusting the duty cycle of the power MOSFET in a flyback converter. The current sense input (CS) monitors the current flowing through the power MOSFET, providing feedback to the controller. By comparing this feedback with the reference voltage (VREF), the controller adjusts the duty cycle to maintain the desired output voltage.

Detailed Application Field Plans

The NCP1200AD40R2G is widely used in various power management applications, including:

  1. AC-DC power supplies
  2. LED lighting systems
  3. Battery chargers
  4. Industrial controls
  5. Consumer electronics

Detailed and Complete Alternative Models

  1. NCP1200P60G: Similar functionality with a different package (DIP-8)
  2. NCP1200D60R2G: Higher maximum duty cycle (85%) with similar specifications
  3. NCP1200P100G: Lower quiescent current (2 mA) with similar characteristics

These alternative models provide flexibility in choosing the most suitable option based on specific requirements and constraints.

In conclusion, the NCP1200AD40R2G is a high-performance current mode controller designed for offline flyback converters. It offers precise control of output voltage and current, along with comprehensive protection features. With its adjustable slope compensation and soft-start function, it provides stable and controlled operation. Although it has a limited maximum duty cycle, it is widely used in various power management applications. Alternative models offer additional options to meet specific needs.

10 domande e risposte comuni relative all'applicazione di NCP1200AD40R2G nelle soluzioni tecniche

Sure! Here are 10 common questions and answers related to the application of NCP1200AD40R2G in technical solutions:

  1. Q: What is NCP1200AD40R2G? A: NCP1200AD40R2G is a high-performance, fixed-frequency current-mode PWM controller IC used in power supply applications.

  2. Q: What are the key features of NCP1200AD40R2G? A: Some key features include a wide input voltage range, integrated oscillator, soft-start function, overvoltage protection, and thermal shutdown.

  3. Q: What is the typical application of NCP1200AD40R2G? A: NCP1200AD40R2G is commonly used in offline flyback converters, LED drivers, battery chargers, and other low-power applications.

  4. Q: What is the operating voltage range of NCP1200AD40R2G? A: The operating voltage range is typically between 8V and 20V.

  5. Q: How does NCP1200AD40R2G control the output voltage? A: NCP1200AD40R2G uses a feedback loop to regulate the output voltage by adjusting the duty cycle of the PWM signal.

  6. Q: Can NCP1200AD40R2G handle high currents? A: No, NCP1200AD40R2G is designed for low-power applications and is not suitable for high-current loads.

  7. Q: Does NCP1200AD40R2G have built-in protection features? A: Yes, NCP1200AD40R2G has various built-in protection features such as overvoltage protection, thermal shutdown, and short-circuit protection.

  8. Q: What is the maximum switching frequency of NCP1200AD40R2G? A: The maximum switching frequency is typically around 100 kHz.

  9. Q: Can NCP1200AD40R2G operate in a wide temperature range? A: Yes, NCP1200AD40R2G can operate within a temperature range of -40°C to +125°C.

  10. Q: Is NCP1200AD40R2G available in different package options? A: Yes, NCP1200AD40R2G is available in various package options such as SOIC-8 and PDIP-8.

Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements.