ON Semiconductor
L'immagine può essere rappresentativa.
Vedi le specifiche per i dettagli del prodotto.
MPSA29G
vedi dettagli Schede tecniche

MPSA29G

Product Overview

Category

MPSA29G belongs to the category of bipolar transistors.

Use

It is commonly used for amplification and switching of electronic signals in various applications.

Characteristics

  • Low noise
  • High current gain
  • Medium power dissipation

Package

The MPSA29G comes in a TO-92 package, which is a widely used through-hole transistor package.

Essence

The essence of MPSA29G lies in its ability to provide reliable amplification and switching capabilities in electronic circuits.

Packaging/Quantity

The MPSA29G is typically available in reels or tubes containing a quantity of 1000 units per package.

Specifications

  • Collector-Base Voltage (VCBO): 80V
  • Collector-Emitter Voltage (VCEO): 60V
  • Emitter-Base Voltage (VEBO): 5V
  • Collector Current (IC): 800mA
  • Power Dissipation (PD): 625mW
  • Transition Frequency (fT): 100MHz
  • Operating Temperature Range: -55°C to 150°C

Detailed Pin Configuration

The MPSA29G has three pins: 1. Collector (C) 2. Base (B) 3. Emitter (E)

Functional Features

  • High current gain
  • Low noise performance
  • Suitable for low-power applications

Advantages

  • Versatile application range
  • Reliable amplification
  • Low power dissipation

Disadvantages

  • Limited power handling capability
  • Sensitive to temperature variations

Working Principles

The MPSA29G operates based on the principles of bipolar junction transistors, utilizing the flow of charge carriers to amplify or switch electronic signals.

Detailed Application Field Plans

The MPSA29G finds extensive use in the following applications: - Audio amplifiers - Signal amplification circuits - Switching circuits - Oscillator circuits

Detailed and Complete Alternative Models

Some alternative models to MPSA29G include: - BC547 - 2N3904 - 2N2222

In conclusion, the MPSA29G is a versatile bipolar transistor with reliable amplification and switching capabilities, making it suitable for a wide range of electronic applications.

Word count: 306

10 domande e risposte comuni relative all'applicazione di MPSA29G nelle soluzioni tecniche

Sure, here are 10 common questions and answers related to the application of MPSA29G in technical solutions:

  1. What is MPSA29G?

    • MPSA29G is a general-purpose NPN bipolar junction transistor (BJT) commonly used in amplification and switching applications.

  2. What are the key features of MPSA29G?

    • The key features of MPSA29G include high current gain, low saturation voltage, and low noise performance, making it suitable for various technical solutions.

  3. What are the typical applications of MPSA29G?

    • MPSA29G is commonly used in audio amplifiers, signal processing circuits, switching circuits, and sensor interfaces due to its versatile characteristics.

  4. What is the maximum collector current rating of MPSA29G?

    • The maximum collector current rating of MPSA29G is typically around 500mA, making it suitable for low to moderate power applications.

  5. How does MPSA29G perform in low-noise applications?

    • MPSA29G exhibits low noise performance, making it suitable for use in sensitive signal amplification and processing circuits.

  6. What are the recommended operating conditions for MPSA29G?

    • The recommended operating conditions for MPSA29G include a maximum collector-emitter voltage (Vce) of 75V and a maximum base current (Ib) of 100mA.

  7. Can MPSA29G be used in high-frequency applications?

    • While MPSA29G is not specifically designed for high-frequency applications, it can still be used in moderate frequency signal amplification and switching circuits.

  8. What are the thermal characteristics of MPSA29G?

    • MPSA29G has a low thermal resistance and can dissipate heat effectively, making it suitable for applications where thermal management is important.

  9. Are there any specific considerations for driving MPSA29G in switching applications?

    • When driving MPSA29G in switching applications, it's important to consider the base current and voltage requirements to ensure proper switching behavior.

  10. Where can I find detailed technical specifications and application notes for MPSA29G?

    • Detailed technical specifications and application notes for MPSA29G can be found in the manufacturer's datasheet and application guides, which provide comprehensive information on its usage in technical solutions.