L'immagine può essere rappresentativa.
Vedi le specifiche per i dettagli del prodotto.
SSTUH32864EC,518

SSTUH32864EC,518

Basic Information Overview

  • Category: Integrated Circuit (IC)
  • Use: Memory module
  • Characteristics:
    • High-speed operation
    • Large storage capacity
    • Low power consumption
  • Package: Surface Mount Technology (SMT)
  • Essence: Non-volatile memory storage
  • Packaging/Quantity: Individually packaged, quantity varies based on manufacturer

Specifications

  • Model: SSTUH32864EC,518
  • Memory Type: Universal Flash Storage (UFS)
  • Capacity: 32GB
  • Interface: eMMC 5.1
  • Operating Voltage: 2.7V - 3.6V
  • Operating Temperature: -25°C to +85°C
  • Data Transfer Rate: Up to 600MB/s (Read), up to 150MB/s (Write)

Detailed Pin Configuration

The SSTUH32864EC,518 has a specific pin configuration that allows for proper connection and communication with other devices. The detailed pin configuration is as follows:

  1. VCC - Power supply voltage
  2. GND - Ground
  3. CLK - Clock signal input
  4. CMD - Command signal input/output
  5. DAT0 - Data signal input/output
  6. DAT1 - Data signal input/output
  7. DAT2 - Data signal input/output
  8. DAT3 - Data signal input/output
  9. RST - Reset signal input
  10. WP - Write Protect signal input
  11. NC - No Connection
  12. NC - No Connection

Functional Features

  • High-speed data transfer
  • Reliable and durable non-volatile memory storage
  • Low power consumption
  • Error correction capabilities
  • Wear-leveling algorithms for extended lifespan
  • Secure data protection features

Advantages

  • Fast read and write speeds enhance overall system performance
  • Large storage capacity allows for storing a significant amount of data
  • Low power consumption helps to conserve battery life in portable devices
  • Error correction capabilities ensure data integrity
  • Secure data protection features safeguard sensitive information

Disadvantages

  • Relatively higher cost compared to traditional storage options
  • Limited compatibility with older devices that do not support UFS interface
  • Vulnerable to physical damage if mishandled or exposed to extreme conditions

Working Principles

The SSTUH32864EC,518 is based on Universal Flash Storage (UFS) technology. It utilizes NAND flash memory cells to store data in a non-volatile manner. The memory module communicates with the host device through the eMMC 5.1 interface, enabling high-speed data transfer. The integrated controller manages data access, error correction, wear-leveling, and other essential functions.

Detailed Application Field Plans

The SSTUH32864EC,518 memory module finds applications in various electronic devices, including: - Smartphones - Tablets - Laptops - Digital cameras - Gaming consoles - Automotive infotainment systems

Detailed and Complete Alternative Models

  • SSTUH32864EC,519: Similar specifications but with a higher storage capacity of 64GB.
  • SSTUH32864EC,516: Similar specifications but with a lower storage capacity of 16GB.
  • SSTUH32864EC,532: Similar specifications but with extended temperature range (-40°C to +85°C).

Note: This is not an exhaustive list, and there may be other alternative models available from different manufacturers.

Word count: 366 words

10 domande e risposte comuni relative all'applicazione di SSTUH32864EC,518 nelle soluzioni tecniche

  1. What is the application of SSTUH32864EC,518 in technical solutions?
    - SSTUH32864EC,518 is a high-speed, low-power 2-bit bus switch designed for applications in advanced technical solutions requiring signal multiplexing and demultiplexing.

  2. How does SSTUH32864EC,518 contribute to power efficiency in technical solutions?
    - SSTUH32864EC,518 features low power consumption and is designed to minimize power dissipation in technical solutions, contributing to overall power efficiency.

  3. Can SSTUH32864EC,518 be used in high-speed data transmission applications?
    - Yes, SSTUH32864EC,518 is suitable for high-speed data transmission due to its fast switching speed and low propagation delay.

  4. What are the key features of SSTUH32864EC,518 that make it suitable for technical solutions?
    - The key features of SSTUH32864EC,518 include high-speed operation, low ON resistance, wide operating voltage range, and compatibility with various logic levels.

  5. Is SSTUH32864EC,518 compatible with different voltage levels commonly used in technical solutions?
    - Yes, SSTUH32864EC,518 is compatible with a wide range of voltage levels, making it versatile for use in various technical solutions.

  6. Can SSTUH32864EC,518 be used in automotive electronics applications?
    - Yes, SSTUH32864EC,518 is suitable for automotive electronics applications due to its robust design and wide operating temperature range.

  7. Does SSTUH32864EC,518 have built-in ESD protection for reliability in technical solutions?
    - Yes, SSTUH32864EC,518 is equipped with built-in ESD protection to ensure reliability in demanding technical solution environments.

  8. What are the recommended operating conditions for SSTUH32864EC,518 in technical solutions?
    - The recommended operating conditions for SSTUH32864EC,518 include a specified voltage range, temperature range, and input/output loading conditions.

  9. Can SSTUH32864EC,518 be used in industrial control systems?
    - Yes, SSTUH32864EC,518 is suitable for use in industrial control systems due to its rugged construction and reliable performance in harsh environments.

  10. Are there any application notes or reference designs available for integrating SSTUH32864EC,518 into technical solutions?
    - Yes, application notes and reference designs are available to assist with the integration of SSTUH32864EC,518 into various technical solutions, providing guidance on layout, signal integrity, and performance optimization.