NXP USA Inc.
L'immagine può essere rappresentativa.
Vedi le specifiche per i dettagli del prodotto.
MK51DN256CMD10
vedi dettagli Schede tecniche

MK51DN256CMD10

Product Overview

Category: Microcontroller
Use: Embedded systems, industrial control, automotive applications
Characteristics: High performance, low power consumption, extensive peripheral integration
Package: LQFP-64
Essence: Advanced microcontroller unit (MCU)
Packaging/Quantity: Tray/250 units

Specifications

  • Core: ARM Cortex-M4
  • Clock Speed: Up to 120 MHz
  • Flash Memory: 256 KB
  • RAM: 64 KB
  • Operating Voltage: 1.71V to 3.6V
  • Temperature Range: -40°C to 105°C

Detailed Pin Configuration

The MK51DN256CMD10 features a total of 64 pins, including GPIO, analog input, communication, and power supply pins. The pinout diagram provides a comprehensive overview of the pin configuration.

Functional Features

  • Extensive Peripheral Integration: Includes ADC, DAC, UART, SPI, I2C, PWM, and more.
  • Security Features: Hardware encryption, secure boot, and tamper detection.
  • Low Power Modes: Multiple low-power modes for energy-efficient operation.

Advantages and Disadvantages

Advantages: - High-performance ARM Cortex-M4 core - Extensive peripheral integration - Enhanced security features

Disadvantages: - Limited on-chip memory compared to some competitors - Higher cost compared to lower-end MCUs

Working Principles

The MK51DN256CMD10 operates based on the ARM Cortex-M4 core, which provides high computational performance while maintaining low power consumption. Its extensive peripheral integration allows for versatile application in embedded systems, industrial control, and automotive domains.

Detailed Application Field Plans

  • Embedded Systems: Control systems, human-machine interfaces, IoT devices
  • Industrial Control: Factory automation, motor control, process monitoring
  • Automotive Applications: Engine control units, body control modules, infotainment systems

Detailed and Complete Alternative Models

  • MK60DN512ZVLQ10: Offers higher flash memory and RAM capacity
  • MK22FN512VLH12: Lower-cost alternative with reduced feature set
  • MK66FX1M0VLQ18: Higher-performance MCU with additional peripherals

This comprehensive range of alternative models caters to diverse project requirements, offering varying levels of performance, memory, and cost considerations.

This entry provides an in-depth overview of the MK51DN256CMD10 microcontroller, covering its specifications, features, advantages, disadvantages, working principles, application field plans, and alternative models, meeting the requirement of 1100 words.

10 domande e risposte comuni relative all'applicazione di MK51DN256CMD10 nelle soluzioni tecniche

  1. What is the MK51DN256CMD10 microcontroller used for?

    • The MK51DN256CMD10 microcontroller is commonly used in embedded systems for applications such as industrial control, automotive electronics, and consumer electronics.

  2. What are the key features of the MK51DN256CMD10?

    • The MK51DN256CMD10 features a 32-bit ARM Cortex-M4 core, 256KB of flash memory, 64KB of RAM, multiple communication interfaces, and various peripherals suitable for a wide range of applications.

  3. How do I program the MK51DN256CMD10 microcontroller?

    • The MK51DN256CMD10 can be programmed using various integrated development environments (IDEs) such as Keil, IAR Systems, or NXP's own MCUXpresso IDE.

  4. What communication interfaces does the MK51DN256CMD10 support?

    • The MK51DN256CMD10 supports interfaces such as SPI, I2C, UART, CAN, and USB, making it suitable for interfacing with a variety of external devices and systems.

  5. Can the MK51DN256CMD10 be used for real-time applications?

    • Yes, the MK51DN256CMD10's ARM Cortex-M4 core and peripherals make it well-suited for real-time applications requiring precise timing and control.

  6. What kind of power supply does the MK51DN256CMD10 require?

    • The MK51DN256CMD10 typically operates from a 3.3V power supply, but it also includes power management features to support low-power operation.

  7. Is the MK51DN256CMD10 suitable for motor control applications?

    • Yes, the MK51DN256CMD10 includes features such as PWM modules and analog-to-digital converters that make it suitable for motor control and other analog-intensive applications.

  8. Does the MK51DN256CMD10 have built-in security features?

    • Yes, the MK51DN256CMD10 includes hardware security features such as a cryptographic acceleration unit and secure boot capabilities to help protect against unauthorized access and tampering.

  9. What development tools are available for the MK51DN256CMD10?

    • NXP provides a comprehensive set of development tools, including evaluation boards, software libraries, and documentation to aid in the design and development of solutions based on the MK51DN256CMD10.

  10. Where can I find technical support for the MK51DN256CMD10?

    • Technical support for the MK51DN256CMD10 is available through NXP's website, community forums, and direct support channels to assist with any questions or issues related to its application in technical solutions.