NXP USA Inc.
L'immagine può essere rappresentativa.
Vedi le specifiche per i dettagli del prodotto.
74ALVT16601DL,518
vedi dettagli Schede tecniche

Encyclopedia Entry: 74ALVT16601DL,518

Product Overview

Category

The 74ALVT16601DL,518 belongs to the category of integrated circuits (ICs).

Use

This IC is commonly used in digital electronic systems for data processing and signal transmission.

Characteristics

  • High-speed operation
  • Low power consumption
  • Wide operating voltage range
  • Compatibility with various logic families
  • Robustness against noise and interference

Package

The 74ALVT16601DL,518 is available in a small outline package (SOP) or a thin shrink small outline package (TSSOP).

Essence

This IC serves as a versatile interface between different components of a digital system, enabling efficient data transfer and synchronization.

Packaging/Quantity

The 74ALVT16601DL,518 is typically packaged in reels or tubes, with quantities varying based on customer requirements.

Specifications

  • Supply Voltage: 2.3V to 3.6V
  • Input Voltage: 0V to VCC
  • Output Voltage: 0V to VCC
  • Operating Temperature Range: -40°C to +85°C
  • Logic Family: ALVT

Detailed Pin Configuration

The 74ALVT16601DL,518 consists of 48 pins, each serving a specific function within the circuit. The pin configuration is as follows:

  1. Pin 1: Output Enable (OE)
  2. Pin 2: Data Input A0
  3. Pin 3: Data Input A1
  4. Pin 4: Data Input A2
  5. Pin 5: Data Input A3
  6. Pin 6: Data Input A4
  7. Pin 7: Data Input A5
  8. Pin 8: Data Input A6
  9. Pin 9: Data Input A7
  10. Pin 10: Data Input A8
  11. Pin 11: Data Input A9
  12. Pin 12: Data Input A10
  13. Pin 13: Data Input A11
  14. Pin 14: Data Input A12
  15. Pin 15: Data Input A13
  16. Pin 16: Data Input A14
  17. Pin 17: Data Input A15
  18. Pin 18: Output Y0
  19. Pin 19: Output Y1
  20. Pin 20: Output Y2
  21. Pin 21: Output Y3
  22. Pin 22: Output Y4
  23. Pin 23: Output Y5
  24. Pin 24: Output Y6
  25. Pin 25: Output Y7
  26. Pin 26: Output Y8
  27. Pin 27: Output Y9
  28. Pin 28: Output Y10
  29. Pin 29: Output Y11
  30. Pin 30: Output Y12
  31. Pin 31: Output Y13
  32. Pin 32: Output Y14
  33. Pin 33: Output Y15
  34. Pin 34: GND (Ground)
  35. Pin 35: VCC (Supply Voltage)
  36. Pin 36: Data Input B0
  37. Pin 37: Data Input B1
  38. Pin 38: Data Input B2
  39. Pin 39: Data Input B3
  40. Pin 40: Data Input B4
  41. Pin 41: Data Input B5
  42. Pin 42: Data Input B6
  43. Pin 43: Data Input B7
  44. Pin 44: Data Input B8
  45. Pin 45: Data Input B9
  46. Pin 46: Data Input B10
  47. Pin 47: Data Input B11
  48. Pin 48: Data Input B12

Functional Features

The 74ALVT16601DL,518 offers the following functional features:

  • Bidirectional data transfer between two independent buses (A and B)
  • Output enable control for tri-state outputs
  • High-speed operation for efficient data processing
  • Wide operating voltage range for compatibility with various systems
  • Robustness against noise and interference for reliable signal transmission

Advantages and Disadvantages

Advantages

  • High-speed operation allows for quick data transfer
  • Low power consumption minimizes energy usage
  • Compatibility with different logic families enhances versatility
  • Wide operating voltage range enables integration into various systems
  • Robustness against noise ensures reliable signal transmission

Disadvantages

  • Limited number of input/output pins may restrict complex system designs
  • Higher cost compared to some alternative models

Working Principles

The 74ALVT16601DL,518 operates based on the principles of digital logic. It utilizes a combination of transistors, resistors, and

10 domande e risposte comuni relative all'applicazione di 74ALVT16601DL,518 nelle soluzioni tecniche

Sure! Here are 10 common questions and answers related to the application of 74ALVT16601DL,518:

  1. Q: What is the function of the 74ALVT16601DL,518? A: The 74ALVT16601DL,518 is a 18-bit universal bus driver with 3-state outputs.

  2. Q: What is the operating voltage range for this device? A: The operating voltage range for the 74ALVT16601DL,518 is typically between 2.7V and 3.6V.

  3. Q: How many 3-state outputs does this device have? A: The 74ALVT16601DL,518 has 18 3-state outputs.

  4. Q: Can this device be used in both parallel and serial data transfer applications? A: Yes, the 74ALVT16601DL,518 can be used in both parallel and serial data transfer applications.

  5. Q: What is the maximum frequency at which this device can operate? A: The maximum frequency at which the 74ALVT16601DL,518 can operate is typically around 200MHz.

  6. Q: Does this device have any built-in protection features? A: Yes, the 74ALVT16601DL,518 has built-in ESD protection on all inputs and outputs.

  7. Q: Can this device be used in automotive applications? A: Yes, the 74ALVT16601DL,518 is qualified for automotive applications according to the AEC-Q100 standard.

  8. Q: What is the power supply current consumption of this device? A: The power supply current consumption of the 74ALVT16601DL,518 is typically around 20mA.

  9. Q: Can this device be used in both CMOS and TTL logic systems? A: Yes, the 74ALVT16601DL,518 is compatible with both CMOS and TTL logic systems.

  10. Q: What is the package type for this device? A: The 74ALVT16601DL,518 is available in a TSSOP (Thin Shrink Small Outline Package) package.

Please note that the answers provided here are general and may vary depending on the specific datasheet and manufacturer's specifications for the 74ALVT16601DL,518.