Nexperia USA Inc.
L'immagine può essere rappresentativa.
Vedi le specifiche per i dettagli del prodotto.
74LVCH2T45GF,115
vedi dettagli Schede tecniche

Encyclopedia Entry: 74LVCH2T45GF,115

Product Overview

Category

The 74LVCH2T45GF,115 belongs to the category of integrated circuits (ICs) and specifically falls under the family of voltage level translators.

Use

This product is primarily used for bidirectional voltage level translation between different logic levels in electronic circuits. It enables seamless communication between devices operating at different voltage levels.

Characteristics

  • Bidirectional voltage level translation
  • Supports multiple logic families
  • Low power consumption
  • High-speed operation
  • Wide operating voltage range
  • Compact package size

Package

The 74LVCH2T45GF,115 is available in a small form factor package, such as a Thin Small Outline Package (TSOP) or a Very Thin Quad Flat No-Lead (VQFN) package.

Essence

The essence of this product lies in its ability to facilitate communication between devices operating at different voltage levels, ensuring compatibility and reliable data transfer.

Packaging/Quantity

The 74LVCH2T45GF,115 is typically packaged in reels or tubes, with a quantity of around 2500 units per reel/tube.

Specifications

  • Supply Voltage Range: 1.65V to 5.5V
  • Logic Voltage Levels: 1.8V, 2.5V, 3.3V, 5V
  • Maximum Data Rate: 400 Mbps
  • Number of Channels: 2
  • Input/Output Compatibility: CMOS/TTL

Detailed Pin Configuration

The 74LVCH2T45GF,115 has a total of 12 pins, which are assigned specific functions as follows:

  1. OE (Output Enable)
  2. A1 (Channel 1 Data Input/Output)
  3. GND (Ground)
  4. VCC (Supply Voltage)
  5. B1 (Channel 2 Data Input/Output)
  6. OE (Output Enable)
  7. A2 (Channel 1 Data Input/Output)
  8. GND (Ground)
  9. VCC (Supply Voltage)
  10. B2 (Channel 2 Data Input/Output)
  11. GND (Ground)
  12. VCC (Supply Voltage)

Functional Features

  • Bidirectional voltage level translation between different logic levels
  • Automatic direction sensing and control
  • High-speed data transfer with minimal delay
  • Low power consumption for energy-efficient operation
  • Robust design for reliable performance in various applications

Advantages and Disadvantages

Advantages

  • Wide operating voltage range allows compatibility with various logic families
  • Compact package size enables space-saving integration into electronic circuits
  • High-speed operation facilitates efficient data transfer
  • Low power consumption contributes to energy efficiency

Disadvantages

  • Limited number of channels (2) may not be suitable for applications requiring multiple simultaneous translations
  • May require additional external components for specific voltage level translation scenarios

Working Principles

The 74LVCH2T45GF,115 utilizes a combination of MOSFETs and level-shifting circuitry to achieve bidirectional voltage level translation. It automatically senses the direction of data flow and adjusts the voltage levels accordingly. The internal circuitry ensures minimal delay and distortion during the translation process.

Detailed Application Field Plans

The 74LVCH2T45GF,115 finds application in various fields, including:

  1. Microcontroller interfacing: Enables communication between microcontrollers operating at different voltage levels.
  2. Sensor networks: Facilitates data exchange between sensors and microcontrollers with varying logic voltage requirements.
  3. Communication systems: Allows seamless integration of devices with different voltage levels in communication networks.
  4. Industrial automation: Supports voltage level translation in control systems and interface modules.
  5. Consumer electronics: Enables compatibility between devices with different logic voltage levels, such as smartphones and peripherals.

Detailed and Complete Alternative Models

  1. SN74LVC2T45: Similar bidirectional voltage level translator with comparable specifications.
  2. NC7SZ125: Single-channel voltage level translator suitable for low-power applications.
  3. TXB0102: Dual-channel voltage level translator with automatic direction sensing.

(Note: This list is not exhaustive and there are several other alternative models available in the market.)

Word Count: 570

10 domande e risposte comuni relative all'applicazione di 74LVCH2T45GF,115 nelle soluzioni tecniche

Sure! Here are 10 common questions and answers related to the application of 74LVCH2T45GF,115 in technical solutions:

  1. Q: What is the function of the 74LVCH2T45GF,115? A: The 74LVCH2T45GF,115 is a dual-bit level shifter with direction control, used for voltage translation between different logic levels.

  2. Q: What is the operating voltage range of the 74LVCH2T45GF,115? A: The operating voltage range is from 1.65V to 5.5V.

  3. Q: Can the 74LVCH2T45GF,115 be used for bidirectional voltage translation? A: Yes, it supports bidirectional voltage translation.

  4. Q: What is the maximum data rate supported by the 74LVCH2T45GF,115? A: The maximum data rate is typically around 400 Mbps.

  5. Q: How many channels does the 74LVCH2T45GF,115 have? A: It has two independent channels.

  6. Q: Does the 74LVCH2T45GF,115 have built-in ESD protection? A: Yes, it has built-in ESD protection up to 8 kV (HBM) and 500 V (MM).

  7. Q: Can the 74LVCH2T45GF,115 be used in both CMOS and TTL logic systems? A: Yes, it is compatible with both CMOS and TTL logic levels.

  8. Q: What is the power supply current consumption of the 74LVCH2T45GF,115? A: The typical power supply current consumption is around 2 mA.

  9. Q: Can the 74LVCH2T45GF,115 be used in high-speed applications? A: Yes, it is suitable for high-speed applications due to its low propagation delay.

  10. Q: What package options are available for the 74LVCH2T45GF,115? A: The 74LVCH2T45GF,115 is available in various package options, such as TSSOP and HVSON.

Please note that the answers provided here are general and may vary depending on the specific datasheet and manufacturer's specifications of the 74LVCH2T45GF,115.