Microsemi Corporation
L'immagine può essere rappresentativa.
Vedi le specifiche per i dettagli del prodotto.
JANTX1N4964CUS
vedi dettagli Schede tecniche

JANTX1N4964CUS

Introduction

The JANTX1N4964CUS is a semiconductor diode belonging to the category of rectifier diodes. It is commonly used in electronic circuits for its specific characteristics and performance.

Basic Information Overview

  • Category: Rectifier Diode
  • Use: Used in electronic circuits for rectification purposes
  • Characteristics: High current capability, low forward voltage drop
  • Package: Through-hole or surface mount
  • Essence: Converts alternating current (AC) to direct current (DC)
  • Packaging/Quantity: Typically available in reels or tubes containing multiple units

Specifications

  • Maximum Average Forward Current: 5A
  • Peak Repetitive Reverse Voltage: 200V
  • Forward Voltage Drop: 1V at 3A
  • Reverse Recovery Time: 35ns

Detailed Pin Configuration

The JANTX1N4964CUS typically has two leads, with the anode connected to the positive terminal and the cathode connected to the negative terminal in a circuit.

Functional Features

  • Efficient conversion of AC to DC
  • Low forward voltage drop minimizes power loss
  • High current capability allows for handling substantial loads

Advantages and Disadvantages

Advantages: - High current capability - Low forward voltage drop - Fast reverse recovery time

Disadvantages: - Limited peak repetitive reverse voltage compared to some other diodes - Sensitive to temperature variations

Working Principles

The JANTX1N4964CUS operates based on the principle of rectification, allowing current to flow in only one direction while blocking it in the opposite direction. When forward-biased, it conducts current efficiently, enabling the conversion of AC to DC.

Detailed Application Field Plans

  • Power supply units
  • Battery chargers
  • Inverters
  • Motor drives
  • Rectifier circuits

Detailed and Complete Alternative Models

  • 1N4007: Similar rectifier diode with higher peak repetitive reverse voltage
  • 1N5408: Higher current capability rectifier diode
  • UF4007: Ultrafast rectifier diode with lower reverse recovery time

In conclusion, the JANTX1N4964CUS rectifier diode offers high current capability and low forward voltage drop, making it suitable for various electronic applications requiring efficient rectification. Its limitations in peak repetitive reverse voltage and sensitivity to temperature variations should be considered when selecting alternative models for specific requirements.

[Word count: 320]

10 domande e risposte comuni relative all'applicazione di JANTX1N4964CUS nelle soluzioni tecniche

  1. What is the JANTX1N4964CUS diode used for?

    • The JANTX1N4964CUS diode is commonly used for voltage regulation, surge protection, and rectification in various technical solutions.

  2. What are the key specifications of the JANTX1N4964CUS diode?

    • The JANTX1N4964CUS diode typically has a voltage rating of 200 volts, a forward current of 1 ampere, and a fast recovery time.

  3. How does the JANTX1N4964CUS diode provide surge protection?

    • The JANTX1N4964CUS diode can clamp transient voltage spikes to a safe level, protecting sensitive components in a circuit from damage.

  4. Can the JANTX1N4964CUS diode be used in high-temperature environments?

    • Yes, the JANTX1N4964CUS diode is designed to operate reliably at elevated temperatures, making it suitable for harsh environmental conditions.

  5. What are the typical applications of the JANTX1N4964CUS diode?

    • The JANTX1N4964CUS diode is commonly used in power supplies, industrial equipment, automotive electronics, and aerospace systems.

  6. Does the JANTX1N4964CUS diode have reverse recovery characteristics?

    • Yes, the JANTX1N4964CUS diode features fast reverse recovery, minimizing switching losses in high-frequency applications.

  7. Is the JANTX1N4964CUS diode available in different package types?

    • Yes, the JANTX1N4964CUS diode is available in various package options, including axial lead, surface mount, and through-hole configurations.

  8. What are the recommended operating conditions for the JANTX1N4964CUS diode?

    • The JANTX1N4964CUS diode should be operated within its specified voltage, current, and temperature limits for optimal performance and reliability.

  9. Can the JANTX1N4964CUS diode be used in bridge rectifier configurations?

    • Yes, the JANTX1N4964CUS diode is suitable for use in bridge rectifier circuits for converting AC to DC power.

  10. Are there any important considerations when designing with the JANTX1N4964CUS diode?

    • It's important to consider thermal management, voltage transients, and proper PCB layout to maximize the performance and longevity of the JANTX1N4964CUS diode in technical solutions.