Micron Technology Inc.
L'immagine può essere rappresentativa.
Vedi le specifiche per i dettagli del prodotto.
MT48LC32M8A2P-75 L:D TR
vedi dettagli Schede tecniche

MT48LC32M8A2P-75 L:D TR

Product Overview

Category: Integrated Circuit (IC)

Use: Memory module

Characteristics: - High-density memory chip - Low power consumption - Fast data transfer rate - Reliable performance

Package: LFBGA (Low Profile Fine-Pitch Ball Grid Array)

Essence: The MT48LC32M8A2P-75 L:D TR is a high-density memory chip designed for various electronic devices that require large storage capacity and fast data access.

Packaging/Quantity: The MT48LC32M8A2P-75 L:D TR is typically packaged in reels, with each reel containing a specific quantity of chips. The exact quantity may vary depending on the manufacturer's specifications.

Specifications

  • Organization: 32M words x 8 bits
  • Voltage Supply: 3.3V
  • Access Time: 7.5 ns
  • Operating Temperature Range: -40°C to +85°C
  • Interface Type: Synchronous DRAM (SDRAM)
  • Package Dimensions: 12mm x 14mm

Detailed Pin Configuration

The MT48LC32M8A2P-75 L:D TR has a total of 54 pins. Here is a detailed pin configuration:

  1. VDD
  2. DQ0
  3. DQ1
  4. DQ2
  5. DQ3
  6. DQ4
  7. DQ5
  8. DQ6
  9. DQ7
  10. VSS
  11. DQ8
  12. DQ9
  13. DQ10
  14. DQ11
  15. DQ12
  16. DQ13
  17. DQ14
  18. DQ15
  19. VSS
  20. DQ16
  21. DQ17
  22. DQ18
  23. DQ19
  24. DQ20
  25. DQ21
  26. DQ22
  27. DQ23
  28. VSS
  29. DQ24
  30. DQ25
  31. DQ26
  32. DQ27
  33. DQ28
  34. DQ29
  35. DQ30
  36. DQ31
  37. VSS
  38. A0
  39. A1
  40. A2
  41. A3
  42. A4
  43. A5
  44. A6
  45. A7
  46. VSS
  47. A8
  48. A9
  49. A10
  50. A11
  51. A12
  52. A13
  53. A14
  54. VSS

Functional Features

  • High-density storage: The MT48LC32M8A2P-75 L:D TR offers a large storage capacity of 256 megabits, allowing it to store a vast amount of data.
  • Fast data transfer rate: With an access time of 7.5 ns, this memory chip enables quick retrieval and storage of information.
  • Low power consumption: The chip is designed to operate efficiently with low power requirements, making it suitable for battery-powered devices.
  • Synchronous operation: The SDRAM interface ensures synchronized communication between the memory chip and the device it is integrated into.

Advantages and Disadvantages

Advantages: - High storage capacity - Fast data transfer rate - Low power consumption - Reliable performance

Disadvantages: - Limited compatibility with older devices that do not support SDRAM interface - Relatively higher cost compared to lower-capacity memory chips

Working Principles

The MT48LC32M8A2P-75 L:D TR operates based on the principles of synchronous dynamic random-access memory (SDRAM). It stores data in a matrix of capacitors, with each capacitor representing a single bit of information. The chip uses an internal clock to synchronize data transfer between the memory cells and the device accessing the memory.

Detailed Application Field Plans

The MT48LC32M8A2P-75 L:D TR is widely used in various electronic devices that require high-density memory, such as: 1. Personal computers 2. Servers 3. Networking equipment 4. Mobile devices 5. Consumer electronics

Detailed and Complete Alternative Models

  1. MT48LC64M8A2P-75 L:D TR: This model offers double the storage capacity compared to the MT48LC32M8A2P-75 L:D TR.
  2. MT48LC128M8A2P-75 L:D TR: This model provides four times the storage capacity compared to the MT48LC32M8A2P-75 L:D TR.
  3. MT48LC256M8A

10 domande e risposte comuni relative all'applicazione di MT48LC32M8A2P-75 L:D TR nelle soluzioni tecniche

1. What is the MT48LC32M8A2P-75 L:D TR?

The MT48LC32M8A2P-75 L:D TR is a specific type of memory chip commonly used in technical solutions.

2. What is the capacity of the MT48LC32M8A2P-75 L:D TR?

The MT48LC32M8A2P-75 L:D TR has a capacity of 32 megabits (4 megabytes).

3. What is the speed rating of the MT48LC32M8A2P-75 L:D TR?

The MT48LC32M8A2P-75 L:D TR has a speed rating of 75 nanoseconds.

4. What does the "L:D" in the part number signify?

The "L:D" in the part number indicates the organization of the memory chip, specifically that it is organized as 32M words x 8 bits.

5. What are some common applications for the MT48LC32M8A2P-75 L:D TR?

Common applications for this memory chip include computer systems, networking equipment, telecommunications devices, and other electronic devices that require high-speed data storage.

6. Can the MT48LC32M8A2P-75 L:D TR be used in both commercial and industrial applications?

Yes, the MT48LC32M8A2P-75 L:D TR is suitable for use in both commercial and industrial applications.

7. Does the MT48LC32M8A2P-75 L:D TR require any special voltage or power requirements?

Yes, the MT48LC32M8A2P-75 L:D TR operates at a voltage of 3.3V and requires a power supply within the specified voltage range.

8. Is the MT48LC32M8A2P-75 L:D TR compatible with other memory chips or modules?

Yes, the MT48LC32M8A2P-75 L:D TR is compatible with other memory chips and modules that use the same interface and voltage specifications.

9. Can the MT48LC32M8A2P-75 L:D TR be soldered onto a PCB (Printed Circuit Board)?

Yes, the MT48LC32M8A2P-75 L:D TR can be soldered onto a PCB using standard surface mount technology.

10. Are there any specific temperature or environmental conditions that the MT48LC32M8A2P-75 L:D TR requires for proper operation?

The MT48LC32M8A2P-75 L:D TR has an operating temperature range of -40°C to +85°C and should be stored in a dry and static-free environment to ensure proper functionality.