Micron Technology Inc.
L'immagine può essere rappresentativa.
Vedi le specifiche per i dettagli del prodotto.
M25P40-VMN3PB
vedi dettagli Schede tecniche

M25P40-VMN3PB

Product Overview

Category

M25P40-VMN3PB belongs to the category of Serial Flash Memory.

Use

It is primarily used for storing and retrieving digital data in electronic devices.

Characteristics

  • Non-volatile memory
  • High-speed data transfer
  • Low power consumption
  • Compact size
  • Wide operating voltage range

Package

M25P40-VMN3PB is available in a small form factor package, making it suitable for space-constrained applications.

Essence

The essence of M25P40-VMN3PB lies in its ability to provide reliable and efficient storage solutions for various electronic devices.

Packaging/Quantity

This product is typically packaged in reels or trays, with each containing a specific quantity of M25P40-VMN3PB chips.

Specifications

  • Memory Size: 4 Megabits (512 Kilobytes)
  • Interface: Serial Peripheral Interface (SPI)
  • Operating Voltage Range: 2.7V to 3.6V
  • Maximum Clock Frequency: 75 MHz
  • Erase/Program Time: 0.5 ms (typical)
  • Data Retention: 20 years (minimum)

Detailed Pin Configuration

  1. Chip Select (/CS)
  2. Serial Clock (SCLK)
  3. Serial Data Input (SI)
  4. Serial Data Output (SO)
  5. Write Protect (/WP)
  6. Hold (/HOLD)
  7. Ground (GND)
  8. Power Supply (VCC)

Functional Features

  • Sector erase and program operations
  • Byte/Page program operations
  • Fast read access time
  • Software and hardware write protection
  • Deep power-down mode for low-power standby

Advantages and Disadvantages

Advantages

  • High-speed data transfer enables quick access to stored information.
  • Low power consumption prolongs battery life in portable devices.
  • Compact size allows for integration into space-constrained designs.
  • Wide operating voltage range ensures compatibility with various systems.

Disadvantages

  • Limited storage capacity compared to higher-capacity flash memory options.
  • Relatively slower erase and program times compared to some competing products.

Working Principles

M25P40-VMN3PB utilizes the Serial Peripheral Interface (SPI) to communicate with the host device. It employs a combination of floating gate and tunnel oxide technology to store data reliably in non-volatile memory cells. The SPI interface facilitates fast and efficient transfer of data between the host and the flash memory.

Detailed Application Field Plans

M25P40-VMN3PB finds applications in various electronic devices, including but not limited to: - Consumer electronics (e.g., smartphones, tablets, digital cameras) - Automotive systems (e.g., infotainment systems, instrument clusters) - Industrial equipment (e.g., control systems, data loggers) - Communication devices (e.g., routers, modems)

Detailed and Complete Alternative Models

  1. M25P16-VMN6TPB: 16 Megabit Serial Flash Memory with similar features and package.
  2. M25P80-VMN6TPB: 8 Megabit Serial Flash Memory with similar features and package.
  3. M25P64-VMN6TPB: 64 Megabit Serial Flash Memory with similar features and package.

These alternative models offer different storage capacities to cater to diverse application requirements.

Word count: 346 words

10 domande e risposte comuni relative all'applicazione di M25P40-VMN3PB nelle soluzioni tecniche

Sure! Here are 10 common questions and answers related to the application of M25P40-VMN3PB in technical solutions:

1. What is the M25P40-VMN3PB? The M25P40-VMN3PB is a serial flash memory device manufactured by Micron. It has a capacity of 4 megabits (512 kilobytes) and operates on a Serial Peripheral Interface (SPI).

2. What are some typical applications for the M25P40-VMN3PB? The M25P40-VMN3PB is commonly used in various embedded systems, consumer electronics, industrial automation, and automotive applications where non-volatile storage is required.

3. What is the operating voltage range of the M25P40-VMN3PB? The M25P40-VMN3PB operates within a voltage range of 2.7V to 3.6V.

4. What is the maximum clock frequency supported by the M25P40-VMN3PB? The M25P40-VMN3PB supports a maximum clock frequency of 75 MHz.

5. How fast is the data transfer rate of the M25P40-VMN3PB? The M25P40-VMN3PB has a maximum data transfer rate of 9.375 megabytes per second (MB/s).

6. Does the M25P40-VMN3PB support sector erase operations? Yes, the M25P40-VMN3PB supports sector erase operations. It can erase sectors of 4 kilobytes each.

7. Can the M25P40-VMN3PB be operated in a low-power mode? Yes, the M25P40-VMN3PB has a deep power-down mode that reduces power consumption when the device is not in use.

8. What is the typical endurance of the M25P40-VMN3PB? The M25P40-VMN3PB has a typical endurance of 100,000 program/erase cycles per sector.

9. Does the M25P40-VMN3PB have any built-in security features? Yes, the M25P40-VMN3PB provides hardware protection mechanisms like write protection and block protection to prevent unauthorized access or modification of data.

10. Is the M25P40-VMN3PB RoHS compliant? Yes, the M25P40-VMN3PB is compliant with the Restriction of Hazardous Substances (RoHS) directive, ensuring it meets environmental standards.

Please note that these answers are based on general information about the M25P40-VMN3PB and may vary depending on specific implementations or revisions of the device. It's always recommended to refer to the official datasheet for accurate and up-to-date information.