MCP6054-E/ST

Product Overview

• Category: Integrated Circuit (IC)
• Use: Operational Amplifier
• Characteristics:
  • Low power consumption
  • Rail-to-rail input/output
  • Wide supply voltage range
  • Small package size
• Package: SOT-23
• Essence: High-performance operational amplifier
• Packaging/Quantity: Tape and Reel, 3000 units per reel

Specifications

• Supply Voltage Range: 2.7V to 6.0V
• Input Offset Voltage: ±1.5mV (maximum)
• Input Bias Current: ±10nA (maximum)
• Gain Bandwidth Product: 1MHz (typical)
• Slew Rate: 0.6V/µs (typical)
• Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The MCP6054-E/ST has a total of 5 pins:

1. VDD: Positive power supply
2. VSS: Negative power supply
3. IN+: Non-inverting input
4. IN-: Inverting input
5. OUT: Output

Functional Features

• Low quiescent current: The MCP6054-E/ST consumes very low power, making it suitable for battery-powered applications.
• Rail-to-rail input/output: It can handle input and output signals that span the entire supply voltage range, maximizing dynamic range.
• Wide supply voltage range: The operational amplifier can operate from 2.7V to 6.0V, providing flexibility in various applications.
• Small package size: The SOT-23 package allows for space-efficient designs.

Advantages and Disadvantages

Advantages: - Low power consumption extends battery life in portable devices. - Rail-to-rail input/output enables accurate signal amplification. - Wide supply voltage range offers versatility in different power supply configurations. - Small package size saves board space.

Disadvantages: - Limited gain bandwidth product may not be suitable for high-frequency applications. - Input offset voltage and bias current may introduce errors in precision applications.

Working Principles

The MCP6054-E/ST is an operational amplifier that amplifies the difference between its two input voltages. It operates by using a differential amplifier configuration, where the non-inverting input (IN+) and inverting input (IN-) receive the input signals. The output voltage is proportional to the difference between these inputs, amplified by the gain of the operational amplifier.

Detailed Application Field Plans

The MCP6054-E/ST is commonly used in various applications, including but not limited to: - Sensor signal conditioning - Portable instrumentation - Battery-powered devices - Audio amplification - Signal buffering

Detailed and Complete Alternative Models

1. MCP6001-E/ST: Single-channel operational amplifier with similar specifications and package.
2. MCP6021-E/ST: Dual-channel operational amplifier with similar specifications and package.
3. MCP6041-E/ST: Quad-channel operational amplifier with similar specifications and package.

These alternative models provide options based on the required number of channels while maintaining similar characteristics and package options.

In conclusion, the MCP6054-E/ST is a high-performance operational amplifier belonging to the integrated circuit category. It offers low power consumption, rail-to-rail input/output, and a wide supply voltage range. With its small package size, it is suitable for various applications such as sensor signal conditioning and portable instrumentation. However, it has limitations in terms of gain bandwidth product and precision applications. Alternative models like MCP6001-E/ST, MCP6021-E/ST, and MCP6041-E/ST provide similar features with varying channel options.