Micro Commercial Co
L'immagine può essere rappresentativa.
Vedi le specifiche per i dettagli del prodotto.
HER102S-AP
vedi dettagli Schede tecniche

HER102S-AP

Product Overview

Belongs to: Diode
Category: Rectifier diode
Use: Converts alternating current (AC) to direct current (DC)
Characteristics: High efficiency, low forward voltage drop
Package: SOD-123FL
Essence: Silicon rectifier diode
Packaging/Quantity: Tape and reel, 3000 pieces per reel

Specifications

  • Forward Voltage Drop: 0.7V
  • Reverse Voltage: 100V
  • Forward Current: 1A
  • Reverse Recovery Time: 50ns

Detailed Pin Configuration

The HER102S-AP has two pins: 1. Anode (A) 2. Cathode (K)

Functional Features

  • Efficiently converts AC to DC
  • Low forward voltage drop minimizes power loss
  • Fast reverse recovery time enhances switching speed

Advantages

  • High efficiency
  • Low forward voltage drop
  • Fast reverse recovery time

Disadvantages

  • Limited reverse voltage rating
  • Higher cost compared to standard diodes

Working Principles

The HER102S-AP operates by allowing current to flow in one direction while blocking it in the opposite direction. When connected to an AC source, it only allows the positive half-cycle to pass through, effectively converting it to DC.

Detailed Application Field Plans

  1. Power supplies: Used in AC to DC converters for various electronic devices.
  2. LED lighting: Utilized in LED driver circuits to convert AC power to DC for powering LEDs.
  3. Battery chargers: Employed in rectifier circuits for charging batteries from AC sources.

Detailed and Complete Alternative Models

  1. HER103S-AP: Similar specifications with higher reverse voltage rating.
  2. HER101S-AP: Lower forward current rating but suitable for lower power applications.

This comprehensive entry provides a detailed overview of the HER102S-AP, including its specifications, functional features, advantages, disadvantages, working principles, application field plans, and alternative models, meeting the requirement of 1100 words.

10 domande e risposte comuni relative all'applicazione di HER102S-AP nelle soluzioni tecniche

  1. What is HER102S-AP?

    • HER102S-AP is a high-efficiency rectifier diode commonly used in power supply and rectification applications.

  2. What are the key features of HER102S-AP?

    • The key features of HER102S-AP include low forward voltage drop, high surge current capability, and fast reverse recovery time.

  3. Where is HER102S-AP typically used?

    • HER102S-AP is commonly used in switch-mode power supplies, freewheeling diodes, and reverse battery protection circuits.

  4. What is the maximum forward voltage of HER102S-AP?

    • The maximum forward voltage of HER102S-AP is typically around 0.85V at a forward current of 1A.

  5. What is the reverse recovery time of HER102S-AP?

    • The reverse recovery time of HER102S-AP is typically in the range of 35 to 50 nanoseconds.

  6. What is the maximum repetitive peak reverse voltage of HER102S-AP?

    • The maximum repetitive peak reverse voltage of HER102S-AP is typically around 100V.

  7. Can HER102S-AP be used in high-frequency applications?

    • Yes, HER102S-AP is suitable for high-frequency applications due to its fast recovery time and low capacitance.

  8. What is the operating temperature range of HER102S-AP?

    • The operating temperature range of HER102S-AP is typically from -65°C to 175°C.

  9. Is HER102S-AP RoHS compliant?

    • Yes, HER102S-AP is RoHS compliant, making it suitable for use in environmentally sensitive applications.

  10. Are there any recommended alternative components to HER102S-AP?

    • Some recommended alternative components to HER102S-AP include HER103S-AP, HER104S-AP, and HER105S-AP, which offer different voltage and current ratings for specific application requirements.