Melexis Technologies NV
L'immagine può essere rappresentativa.
Vedi le specifiche per i dettagli del prodotto.
MLX90367EDC-ABV-000-SP
vedi dettagli Schede tecniche

MLX90367EDC-ABV-000-SP

Product Overview

The MLX90367EDC-ABV-000-SP is a versatile magnetic field sensor designed for various applications. This sensor falls under the category of magnetic sensors and is widely used in automotive, industrial, and consumer electronics applications. Its key characteristics include high sensitivity, low power consumption, and robust packaging. The sensor is typically available in small surface-mount packages and is essential for precise measurement of magnetic fields. It is usually supplied in reels or trays, with specific quantities per package.

Specifications

  • Operating Voltage: 2.7V to 5.5V
  • Output Interface: Analog/PWM
  • Operating Temperature Range: -40°C to 150°C
  • Sensing Range: ±50mT
  • Package Type: DFN-10

Detailed Pin Configuration

The MLX90367EDC-ABV-000-SP features a 10-pin Dual Flat No-leads (DFN) package. The pin configuration is as follows: 1. VDD 2. GND 3. VOUT 4. PWM/SDO 5. SCL/SDA 6. ADDR 7. MODE 8. NC 9. NC 10. NC

Functional Features

  • High sensitivity to magnetic fields
  • Low power consumption
  • Digital output interface for easy integration
  • I2C and PWM output options
  • On-chip temperature compensation

Advantages and Disadvantages

Advantages

  • Wide operating voltage range
  • Small form factor
  • High accuracy
  • Robust packaging for harsh environments

Disadvantages

  • Limited sensing range compared to some alternatives
  • Higher cost compared to basic magnetic sensors

Working Principles

The MLX90367EDC-ABV-000-SP operates based on the Hall effect, where a voltage difference is created across a conductor when subjected to a magnetic field. This voltage is then measured and converted into a digital or analog output signal, providing information about the strength and direction of the magnetic field.

Detailed Application Field Plans

The MLX90367EDC-ABV-000-SP finds extensive use in various applications, including: - Automotive: Position sensing, pedal position detection, gear shifters - Industrial: Proximity sensing, linear and angular position sensing - Consumer Electronics: Joysticks, knobs, and rotary encoders

Detailed and Complete Alternative Models

Some alternative models to the MLX90367EDC-ABV-000-SP include: - MLX90393: Offers extended sensing range and higher resolution - MLX90364: Lower cost option with reduced sensing range - MLX90378: Provides additional diagnostic features and integrated EEPROM

In conclusion, the MLX90367EDC-ABV-000-SP is a highly versatile magnetic field sensor with a wide range of applications and robust performance characteristics. Its compact design and high sensitivity make it an ideal choice for demanding sensing requirements across various industries.

Word Count: 411

10 domande e risposte comuni relative all'applicazione di MLX90367EDC-ABV-000-SP nelle soluzioni tecniche

  1. What is the MLX90367EDC-ABV-000-SP?

    • The MLX90367EDC-ABV-000-SP is a high-performance, programmable 3D Hall sensor designed for accurate and reliable measurement of magnetic fields.

  2. What are the key features of the MLX90367EDC-ABV-000-SP?

    • The key features include high accuracy, 3D magnetic field measurement, digital output, programmability, and robustness in harsh environments.

  3. How can the MLX90367EDC-ABV-000-SP be used in technical solutions?

    • It can be used for position sensing, angular sensing, current sensing, and other applications requiring precise magnetic field measurements.

  4. What are the typical operating conditions for the MLX90367EDC-ABV-000-SP?

    • The sensor operates at a supply voltage of 2.7V to 5.5V and over a temperature range of -40°C to 125°C.

  5. Can the MLX90367EDC-ABV-000-SP be integrated with microcontrollers or other digital systems?

    • Yes, it has a digital output interface and can be easily integrated with microcontrollers and digital systems.

  6. What programming interfaces are available for configuring the MLX90367EDC-ABV-000-SP?

    • The sensor can be programmed using I2C, SPI, or SENT (Single Edge Nibble Transmission) interfaces.

  7. Is the MLX90367EDC-ABV-000-SP suitable for automotive applications?

    • Yes, it is suitable for automotive applications due to its robustness and ability to operate in harsh environments.

  8. What are the potential benefits of using the MLX90367EDC-ABV-000-SP in technical solutions?

    • The sensor offers high accuracy, reliability, and flexibility in measuring magnetic fields, making it ideal for various technical applications.

  9. Are there any specific calibration requirements for the MLX90367EDC-ABV-000-SP?

    • The sensor comes with built-in calibration capabilities, but additional calibration may be required based on the specific application.

  10. Where can I find detailed technical documentation and support for the MLX90367EDC-ABV-000-SP?

    • Detailed technical documentation and support for the sensor can be obtained from the manufacturer's website or through their customer support channels.