Littelfuse Inc.
L'immagine può essere rappresentativa.
Vedi le specifiche per i dettagli del prodotto.
V470ZA05PX1347
vedi dettagli Schede tecniche

V470ZA05PX1347

Introduction

The V470ZA05PX1347 is a varistor, which belongs to the category of electronic components used for voltage regulation and surge protection. This entry provides an overview of the basic information, specifications, detailed pin configuration, functional features, advantages and disadvantages, working principles, detailed application field plans, and alternative models of the V470ZA05PX1347.

Basic Information Overview

  • Category: Electronic Component
  • Use: Voltage Regulation and Surge Protection
  • Characteristics: Fast response time, high energy absorption capacity
  • Package: Disc
  • Essence: Zinc Oxide Varistor
  • Packaging/Quantity: Bulk packaging, quantity varies based on supplier

Specifications

  • Voltage Rating: 470V
  • Peak Current: 5kA
  • Maximum Allowable Voltage: 745V
  • Energy Absorption Capacity: 47J
  • Operating Temperature Range: -40°C to 85°C

Detailed Pin Configuration

The V470ZA05PX1347 has a disc-shaped body with two axial leads for connection to the circuit. The pin configuration includes the identification of the anode and cathode terminals.

Functional Features

  • Surge Protection: Provides protection against transient overvoltage conditions.
  • Voltage Regulation: Helps in stabilizing the voltage within the circuit.
  • Fast Response Time: Quickly responds to voltage spikes to protect connected devices.

Advantages and Disadvantages

Advantages

  • High energy absorption capacity
  • Fast response time
  • Compact size

Disadvantages

  • Limited lifespan after multiple surge events
  • Susceptible to thermal runaway under extreme conditions

Working Principles

The V470ZA05PX1347 operates based on the principle of nonlinear voltage-dependent resistance. When subjected to a surge or overvoltage condition, the varistor conducts current to divert excess energy away from the protected circuit, thereby limiting the voltage across the circuit.

Detailed Application Field Plans

The V470ZA05PX1347 is commonly used in various electronic and electrical systems, including: - Power Supplies - Telecommunication Equipment - Industrial Control Systems - Consumer Electronics - Lighting Systems

Detailed and Complete Alternative Models

  • V275LA20AP: 275V Varistor with similar characteristics
  • V680ZA05P: 680V Varistor with higher voltage rating
  • V130LA20A: 130V Varistor with lower voltage rating

In conclusion, the V470ZA05PX1347 is a vital component in electronic systems, providing essential surge protection and voltage regulation capabilities. Its fast response time and high energy absorption make it suitable for a wide range of applications.

Word Count: 410

10 domande e risposte comuni relative all'applicazione di V470ZA05PX1347 nelle soluzioni tecniche

  1. What is V470ZA05PX1347?

    • V470ZA05PX1347 is a type of metal oxide varistor (MOV) that is commonly used for overvoltage protection in electronic circuits.

  2. What are the key specifications of V470ZA05PX1347?

    • V470ZA05PX1347 has a maximum AC voltage of 300V, a maximum DC voltage of 385V, and a peak current of 6500A.

  3. How does V470ZA05PX1347 provide overvoltage protection?

    • V470ZA05PX1347 acts as a voltage-dependent resistor, conducting current when the voltage exceeds a certain threshold, thereby diverting excess voltage away from sensitive components.

  4. In what applications is V470ZA05PX1347 commonly used?

    • V470ZA05PX1347 is often used in power supplies, industrial equipment, consumer electronics, and telecommunications devices to protect against transient voltage spikes.

  5. What are the typical failure modes of V470ZA05PX1347?

    • V470ZA05PX1347 can fail due to prolonged exposure to overvoltage conditions, excessive current, or thermal stress, leading to degradation or catastrophic failure.

  6. How should V470ZA05PX1347 be mounted in a circuit?

    • V470ZA05PX1347 should be securely soldered or connected using appropriate terminals to ensure reliable electrical and mechanical connection.

  7. What are the temperature and humidity considerations for V470ZA05PX1347?

    • V470ZA05PX1347 operates within a temperature range of -40°C to 85°C and is suitable for use in humid environments with proper encapsulation.

  8. Can V470ZA05PX1347 be used in high-frequency applications?

    • V470ZA05PX1347 may exhibit limitations in high-frequency applications due to its inherent capacitance and inductance characteristics.

  9. Are there any safety precautions to consider when using V470ZA05PX1347?

    • Users should follow proper ESD handling procedures and ensure that V470ZA05PX1347 is not subjected to mechanical stress or excessive shock during installation.

  10. What are the alternatives to V470ZA05PX1347 for overvoltage protection?

    • Alternatives to V470ZA05PX1347 include other MOVs with different voltage and current ratings, as well as transient voltage suppressor (TVS) diodes and gas discharge tubes for specific application requirements.