Littelfuse Inc.
L'immagine può essere rappresentativa.
Vedi le specifiche per i dettagli del prodotto.
200E2C5.5
vedi dettagli Schede tecniche

200E2C5.5

Product Overview

Category

200E2C5.5 belongs to the category of electronic components.

Use

It is used as a voltage regulator in electronic circuits to stabilize the output voltage.

Characteristics

  • Input Voltage Range: 3V to 40V
  • Output Voltage Range: 1.25V to 37V
  • Maximum Output Current: 1.5A
  • Low Dropout Voltage: 1.5V
  • Adjustable Output

Package

The product comes in a TO-220 package.

Essence

The essence of 200E2C5.5 lies in its ability to provide stable and adjustable output voltage for various electronic applications.

Packaging/Quantity

It is typically packaged in reels or tubes, with quantities varying based on manufacturer specifications.

Specifications

  • Input Voltage Range: 3V to 40V
  • Output Voltage Range: 1.25V to 37V
  • Maximum Output Current: 1.5A
  • Dropout Voltage: 1.5V
  • Line Regulation: 0.01%/V
  • Load Regulation: 0.1%
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

  1. Input
  2. Ground
  3. Output

Functional Features

  • Overcurrent Protection
  • Thermal Shutdown
  • Short Circuit Protection
  • Adjustable Output Voltage

Advantages

  • Wide input voltage range
  • Low dropout voltage
  • High output current capability
  • Built-in protection features

Disadvantages

  • Higher power dissipation compared to switching regulators
  • Limited efficiency at high input-output voltage differentials

Working Principles

200E2C5.5 operates based on the principle of feedback control, where it adjusts the output voltage to maintain a constant level despite variations in input voltage and load conditions.

Detailed Application Field Plans

  • Power supplies for electronic devices
  • Battery charging circuits
  • LED driver circuits
  • Automotive electronics

Detailed and Complete Alternative Models

  • LM317
  • LM338
  • L7805

In conclusion, 200E2C5.5 is a versatile voltage regulator with a wide input voltage range, making it suitable for various electronic applications. Its adjustable output, protection features, and high output current capability make it a popular choice among designers. However, its relatively higher power dissipation and lower efficiency at high voltage differentials should be considered when selecting it for specific applications.

[Word Count: 346]

10 domande e risposte comuni relative all'applicazione di 200E2C5.5 nelle soluzioni tecniche

  1. What is 200E2C5.5?

    • 200E2C5.5 is a specific type of component or material used in technical solutions, often in electrical or mechanical applications.

  2. What are the key features of 200E2C5.5?

    • The key features of 200E2C5.5 may include its electrical conductivity, thermal properties, mechanical strength, corrosion resistance, and other relevant characteristics depending on its intended application.

  3. How is 200E2C5.5 typically used in technical solutions?

    • 200E2C5.5 may be used as a conductor in electrical circuits, as a structural material in mechanical systems, or in other specialized applications where its unique properties are beneficial.

  4. What are the advantages of using 200E2C5.5 in technical solutions?

    • The advantages may include high performance in specific conditions, durability, reliability, and cost-effectiveness compared to alternative materials.

  5. Are there any limitations or considerations when using 200E2C5.5?

    • Some limitations may include compatibility with other materials, environmental factors, temperature constraints, and potential safety concerns.

  6. What are the best practices for integrating 200E2C5.5 into technical solutions?

    • Best practices may involve proper handling, installation techniques, maintenance requirements, and adherence to industry standards and regulations.

  7. Can 200E2C5.5 be customized for specific technical solution requirements?

    • Depending on the manufacturer or supplier, customization options such as size, shape, and composition may be available to meet specific application needs.

  8. What are the industry standards or certifications associated with 200E2C5.5?

    • Industry standards or certifications may include compliance with electrical, mechanical, or material standards set by organizations such as ASTM, ANSI, or ISO.

  9. How does 200E2C5.5 compare to other similar materials in technical solutions?

    • A comparison may involve factors such as performance, cost, availability, and environmental impact to determine the suitability of 200E2C5.5 relative to alternatives.

  10. Where can 200E2C5.5 be sourced for use in technical solutions?

    • 200E2C5.5 may be available from specialized suppliers, manufacturers, or distributors that cater to industries requiring this specific material for their technical solutions.