KEMET
L'immagine può essere rappresentativa.
Vedi le specifiche per i dettagli del prodotto.
VP3225K401R095
vedi dettagli Schede tecniche

VP3225K401R095

Product Overview

  • Category: Electronic Component
  • Use: Voltage Regulator
  • Characteristics: High precision, low dropout voltage, small package size
  • Package: SMD (Surface Mount Device)
  • Essence: Regulates input voltage to a stable output voltage
  • Packaging/Quantity: Tape and reel, 3000 units per reel

Specifications

  • Input Voltage Range: 3.0V to 5.5V
  • Output Voltage: 1.8V
  • Output Current: 150mA
  • Dropout Voltage: 200mV at 100mA
  • Operating Temperature Range: -40°C to +85°C
  • Package Type: SOT-23-5

Detailed Pin Configuration

  • Pin 1: Input Voltage (VIN)
  • Pin 2: Ground (GND)
  • Pin 3: Enable (EN)
  • Pin 4: Output Voltage (VOUT)
  • Pin 5: Bypass Capacitor (BYP)

Functional Features

  • High Precision: Provides accurate output voltage regulation
  • Low Dropout Voltage: Allows for efficient operation with low input voltages
  • Small Package Size: Ideal for space-constrained applications

Advantages and Disadvantages

Advantages

  • Compact size
  • High precision
  • Low dropout voltage

Disadvantages

  • Limited output current capacity
  • Restricted input voltage range

Working Principles

The VP3225K401R095 operates by comparing the output voltage to a reference voltage and adjusting the pass element to maintain a stable output voltage despite variations in the input voltage.

Detailed Application Field Plans

This voltage regulator is suitable for various battery-powered devices, such as portable electronics, IoT devices, and wearable technology. It can also be used in sensor modules, data acquisition systems, and other low-power applications.

Detailed and Complete Alternative Models

  • VP3225K501R095: Similar specifications with a different output voltage
  • VP3225K301R095: Lower output current but wider input voltage range
  • VP3225K401R090: Higher output current with a slightly higher dropout voltage

In conclusion, the VP3225K401R095 is a compact and precise voltage regulator suitable for low-power applications with tight space constraints. While it has limitations in terms of output current and input voltage range, its high precision and small package size make it an ideal choice for various electronic devices.

[Word Count: 324]

10 domande e risposte comuni relative all'applicazione di VP3225K401R095 nelle soluzioni tecniche

  1. What is the VP3225K401R095?

    • The VP3225K401R095 is a specific model of inductor used in various technical solutions, known for its high performance and reliability.

  2. What are the key specifications of the VP3225K401R095?

    • The VP3225K401R095 has a rated inductance of 400nH and a current rating of 950mA, making it suitable for a wide range of applications.

  3. In what types of technical solutions can the VP3225K401R095 be used?

    • The VP3225K401R095 can be used in power management, RF circuits, and other electronic applications where high-frequency inductors are required.

  4. What are the temperature characteristics of the VP3225K401R095?

    • The VP3225K401R095 is designed to operate within a temperature range of -40°C to +125°C, ensuring stability in various environmental conditions.

  5. Does the VP3225K401R095 have any unique features that set it apart from other inductors?

    • Yes, the VP3225K401R095 is known for its low profile and high Q factor, making it ideal for space-constrained designs and high-frequency applications.

  6. Are there any recommended applications or circuits where the VP3225K401R095 excels?

    • The VP3225K401R095 is well-suited for use in DC-DC converters, voltage regulation, and RF matching networks due to its excellent performance characteristics.

  7. What are the typical performance trade-offs when using the VP3225K401R095 in a design?

    • While the VP3225K401R095 offers high performance, designers should consider its DC resistance and self-resonant frequency when integrating it into their circuits.

  8. Can the VP3225K401R095 be used in automotive or industrial applications?

    • Yes, the VP3225K401R095 is suitable for automotive and industrial applications, provided that the operating conditions and environmental factors are within its specified limits.

  9. Are there any application notes or reference designs available for incorporating the VP3225K401R095 into a technical solution?

    • Yes, manufacturers often provide application notes and reference designs to assist engineers in effectively integrating the VP3225K401R095 into their designs.

  10. Where can I purchase the VP3225K401R095 and what is its typical lead time?

    • The VP3225K401R095 can be sourced from authorized distributors and has a typical lead time that varies based on demand and availability.