L'immagine può essere rappresentativa.
Vedi le specifiche per i dettagli del prodotto.
IXTV26N50PS

IXTV26N50PS

Product Overview

Category

The IXTV26N50PS belongs to the category of power MOSFETs.

Use

It is used as a high-voltage, high-speed switching device in various electronic applications.

Characteristics

  • High voltage capability
  • Low input capacitance
  • Fast switching speed
  • Low on-resistance

Package

The IXTV26N50PS is typically available in a TO-247 package.

Essence

This power MOSFET is essential for efficient power management and control in electronic circuits.

Packaging/Quantity

It is commonly packaged in reels or tubes and is available in varying quantities based on customer requirements.

Specifications

  • Voltage Rating: 500V
  • Current Rating: 26A
  • RDS(ON): 0.19Ω
  • Gate Charge: 45nC
  • Operating Temperature: -55°C to 150°C

Detailed Pin Configuration

The IXTV26N50PS typically has three pins: 1. Gate (G) 2. Drain (D) 3. Source (S)

Functional Features

  • High voltage capability allows for use in high-power applications.
  • Low input capacitance enables fast switching speeds.
  • Low on-resistance minimizes power losses and improves efficiency.

Advantages

  • Suitable for high-voltage applications
  • Fast switching speed
  • Low power dissipation

Disadvantages

  • Higher cost compared to lower voltage MOSFETs
  • Requires careful handling due to its high voltage rating

Working Principles

The IXTV26N50PS operates based on the principles of field-effect transistors, where the voltage applied to the gate terminal controls the flow of current between the drain and source terminals.

Detailed Application Field Plans

The IXTV26N50PS is commonly used in the following applications: - Switch-mode power supplies - Motor control - Inverters - Electronic ballasts

Detailed and Complete Alternative Models

Some alternative models to the IXTV26N50PS include: - IRFP4668PbF - STW26NM60N

In conclusion, the IXTV26N50PS is a high-voltage power MOSFET with fast switching characteristics, making it suitable for various power management applications. Its high voltage capability and low on-resistance make it an ideal choice for high-power electronic designs.

[Word Count: 324]

10 domande e risposte comuni relative all'applicazione di IXTV26N50PS nelle soluzioni tecniche

  1. What is the maximum voltage rating of IXTV26N50PS?

    • The maximum voltage rating of IXTV26N50PS is 500V.
  2. What is the maximum current rating of IXTV26N50PS?

    • The maximum current rating of IXTV26N50PS is 26A.
  3. What type of package does IXTV26N50PS come in?

    • IXTV26N50PS comes in a TO-247 package.
  4. What are the typical applications for IXTV26N50PS?

    • IXTV26N50PS is commonly used in applications such as motor drives, inverters, and power supplies.
  5. What is the on-state resistance of IXTV26N50PS?

    • The on-state resistance of IXTV26N50PS is typically around 0.19 ohms.
  6. Is IXTV26N50PS suitable for high-frequency switching applications?

    • Yes, IXTV26N50PS is suitable for high-frequency switching due to its fast switching characteristics.
  7. Does IXTV26N50PS have built-in protection features?

    • IXTV26N50PS does not have built-in protection features and may require external circuitry for overcurrent or overvoltage protection.
  8. What is the operating temperature range of IXTV26N50PS?

    • The operating temperature range of IXTV26N50PS is typically -55°C to 150°C.
  9. Can IXTV26N50PS be used in parallel to increase current handling capability?

    • Yes, IXTV26N50PS can be used in parallel to increase current handling capability in certain applications.
  10. Are there any specific layout considerations when using IXTV26N50PS in a circuit?

    • It is important to consider proper thermal management and minimize parasitic inductance in the layout when using IXTV26N50PS in a circuit.