IXYS
L'immagine può essere rappresentativa.
Vedi le specifiche per i dettagli del prodotto.
IXTH80N20L
vedi dettagli Schede tecniche

IXTH80N20L

Product Overview

Category

The IXTH80N20L belongs to the category of power MOSFETs.

Use

It is commonly used in power electronics applications such as motor control, power supplies, and inverters.

Characteristics

  • High voltage capability
  • Low on-resistance
  • Fast switching speed
  • High reliability

Package

The IXTH80N20L is typically available in a TO-247 package.

Essence

This MOSFET is essential for efficient power management and control in various electronic systems.

Packaging/Quantity

It is usually packaged individually and sold in quantities suitable for industrial and commercial use.

Specifications

  • Voltage Rating: 200V
  • Current Rating: 80A
  • On-Resistance: 0.038 ohms
  • Gate Threshold Voltage: 2.5V
  • Operating Temperature Range: -55°C to 175°C

Detailed Pin Configuration

The IXTH80N20L typically has three pins: 1. Gate (G) 2. Drain (D) 3. Source (S)

Functional Features

  • Low conduction losses
  • High efficiency
  • Enhanced thermal performance
  • Robustness against overcurrent and overvoltage conditions

Advantages

  • High voltage capability allows for versatile applications
  • Low on-resistance minimizes power dissipation
  • Fast switching speed enables efficient power control

Disadvantages

  • Higher cost compared to standard MOSFETs
  • Requires careful handling due to its sensitivity to electrostatic discharge

Working Principles

The IXTH80N20L operates based on the principle of field-effect transistors, where the gate voltage controls the flow of current between the drain and source terminals. When the gate voltage is applied, it modulates the conductivity of the MOSFET, allowing for precise power regulation.

Detailed Application Field Plans

The IXTH80N20L is widely used in the following applications: - Motor drives - Uninterruptible power supplies (UPS) - Solar inverters - Switch-mode power supplies

Detailed and Complete Alternative Models

Some alternative models to the IXTH80N20L include: - IRFP4668PbF - FDPF33N25T - STW45NM50FD

In conclusion, the IXTH80N20L power MOSFET offers high-performance characteristics suitable for demanding power electronics applications. Its advanced features and robust design make it an ideal choice for efficient power management and control.

[Word count: 319]

10 domande e risposte comuni relative all'applicazione di IXTH80N20L nelle soluzioni tecniche

  1. What is IXTH80N20L?

    • IXTH80N20L is a high voltage, high speed power MOSFET designed for various technical solutions requiring efficient power management.

  2. What are the key features of IXTH80N20L?

    • The key features include a high voltage rating, low on-resistance, fast switching speed, and rugged construction for reliable performance in demanding applications.

  3. In what technical solutions can IXTH80N20L be used?

    • IXTH80N20L is commonly used in applications such as motor control, power supplies, inverters, and other high voltage switching circuits.

  4. What is the maximum voltage and current rating of IXTH80N20L?

    • The maximum voltage rating is typically [insert voltage rating] and the maximum current rating is typically [insert current rating].

  5. How does IXTH80N20L compare to other similar MOSFETs?

    • IXTH80N20L offers a balance of high voltage capability, low on-resistance, and fast switching speed, making it suitable for a wide range of technical solutions.

  6. What are the thermal considerations when using IXTH80N20L?

    • Proper heat sinking and thermal management are important to ensure the MOSFET operates within its temperature limits for optimal performance and reliability.

  7. Are there any application notes or reference designs available for IXTH80N20L?

    • Yes, the manufacturer provides application notes and reference designs to assist in the proper implementation of IXTH80N20L in various technical solutions.

  8. Can IXTH80N20L be used in automotive applications?

    • Yes, IXTH80N20L is suitable for certain automotive applications, but it's important to consider specific automotive requirements and standards.

  9. What are the recommended driving and protection circuitry for IXTH80N20L?

    • Proper gate driving circuitry and overcurrent/overvoltage protection measures should be implemented to ensure safe and reliable operation of IXTH80N20L.

  10. Where can I find detailed specifications and datasheets for IXTH80N20L?

    • Detailed specifications and datasheets for IXTH80N20L can be found on the manufacturer's website or through authorized distributors.