Vedi le specifiche per i dettagli del prodotto.
IXFX250N10P
Product Overview
- Category: Power MOSFET
- Use: Power switching applications
- Characteristics: High voltage, low on-resistance, fast switching speed
- Package: TO-220AB
- Essence: N-channel enhancement mode power MOSFET
- Packaging/Quantity: Tape & Reel, 50 pieces per reel
Specifications
- Voltage Rating: 100V
- Current Rating: 250A
- On-Resistance: 0.009 ohms
- Gate Charge: 150nC
- Operating Temperature: -55°C to 175°C
Detailed Pin Configuration
The IXFX250N10P has a standard TO-220AB pin configuration with three pins: gate (G), drain (D), and source (S).
Functional Features
- Low on-resistance for minimal power loss
- Fast switching speed for efficient power conversion
- High voltage rating for versatile applications
Advantages and Disadvantages
- Advantages:
- High current and voltage ratings
- Low on-resistance
- Fast switching speed
- Disadvantages:
- Relatively high gate charge
- Limited operating temperature range
Working Principles
The IXFX250N10P operates based on the principles of field-effect transistors, utilizing the control of the gate voltage to modulate the flow of current between the drain and source terminals.
Detailed Application Field Plans
This power MOSFET is suitable for a wide range of applications including: - Switching power supplies - Motor control - Inverters - DC-DC converters - Battery management systems
Detailed and Complete Alternative Models
- Alternative Model 1: IXFX260N10P
- Voltage Rating: 100V
- Current Rating: 260A
- On-Resistance: 0.008 ohms
- Alternative Model 2: IXFX240N10P
- Voltage Rating: 100V
- Current Rating: 240A
- On-Resistance: 0.010 ohms
Note: The above information is subject to change based on the manufacturer's specifications.
This entry provides comprehensive details about the IXFX250N10P power MOSFET, including its basic information, specifications, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.
10 domande e risposte comuni relative all'applicazione di IXFX250N10P nelle soluzioni tecniche
What is IXFX250N10P?
- IXFX250N10P is a power MOSFET transistor designed for high efficiency and high frequency applications.
What are the key features of IXFX250N10P?
- The key features of IXFX250N10P include low on-resistance, fast switching speed, and high current capability.
What are the typical applications of IXFX250N10P?
- Typical applications of IXFX250N10P include power supplies, motor control, and DC-DC converters.
What is the maximum voltage and current rating of IXFX250N10P?
- IXFX250N10P has a maximum voltage rating of 100V and a continuous drain current rating of 250A.
What is the thermal resistance of IXFX250N10P?
- The thermal resistance of IXFX250N10P is typically around 0.35°C/W.
Does IXFX250N10P require a heat sink for operation?
- Yes, IXFX250N10P typically requires a heat sink to dissipate heat effectively during operation.
Can IXFX250N10P be used in automotive applications?
- Yes, IXFX250N10P is suitable for use in automotive applications due to its high current capability and rugged design.
What are the recommended gate drive voltage and current for IXFX250N10P?
- The recommended gate drive voltage for IXFX250N10P is typically around 10V, and the gate drive current should be sufficient to charge and discharge the gate capacitance quickly.
Is IXFX250N10P suitable for high-frequency switching applications?
- Yes, IXFX250N10P is designed for high-frequency switching applications due to its fast switching speed and low on-resistance.
Where can I find the detailed datasheet and application notes for IXFX250N10P?
- The detailed datasheet and application notes for IXFX250N10P can be found on the manufacturer's official website or through authorized distributors.