Vedi le specifiche per i dettagli del prodotto.
IS25LP080D-JNLE-TR
Basic Information Overview
Category: Integrated Circuit (IC)
Use: Non-volatile Memory
Characteristics: - High-performance Serial NOR Flash Memory - Low power consumption - Wide operating voltage range - Small form factor - High-speed data transfer
Package: JNLE-TR (8-pin SOIC package)
Essence: The IS25LP080D-JNLE-TR is a high-performance Serial NOR Flash Memory IC that provides non-volatile storage for various electronic devices.
Packaging/Quantity: The IS25LP080D-JNLE-TR is typically packaged in reels and comes in quantities of 2500 units per reel.
Specifications
- Memory Capacity: 8 Megabits (1 Megabyte)
- Interface: Serial Peripheral Interface (SPI)
- Operating Voltage Range: 2.7V - 3.6V
- Operating Temperature Range: -40°C to +85°C
- Data Transfer Rate: Up to 80 MHz
- Erase/Program Time: 4 ms (typical)
- Data Retention: 20 years (typical)
Detailed Pin Configuration
The IS25LP080D-JNLE-TR has the following pin configuration:
- Chip Select (/CS)
- Serial Clock (SCLK)
- Serial Data Input (SI)
- Serial Data Output (SO)
- Write Enable (/WE)
- Hold (/HOLD)
- VCC (Power Supply)
- Ground (GND)
Functional Features
- High-speed read and write operations
- Flexible erase capability (sector, block, or chip erase)
- Software and hardware protection options
- Deep power-down mode for low-power applications
- Fast program and erase times
- Reliable data retention
Advantages and Disadvantages
Advantages: - High-performance data transfer - Low power consumption - Wide operating voltage range - Small form factor for space-constrained designs - Reliable and durable non-volatile memory
Disadvantages: - Limited storage capacity compared to other memory technologies - Relatively higher cost per unit of storage compared to some alternatives
Working Principles
The IS25LP080D-JNLE-TR utilizes the Serial Peripheral Interface (SPI) to communicate with a host microcontroller or system. It stores data in non-volatile memory cells, which retain information even when power is removed. The SPI interface allows for high-speed data transfer between the IC and the host device.
Detailed Application Field Plans
The IS25LP080D-JNLE-TR is widely used in various electronic devices that require non-volatile memory storage. Some common application fields include:
Consumer Electronics:
- Smartphones
- Tablets
- Digital cameras
- Portable media players
Automotive:
- Infotainment systems
- Instrument clusters
- Advanced driver-assistance systems (ADAS)
Industrial:
- Internet of Things (IoT) devices
- Industrial automation systems
- Medical equipment
Communication:
- Routers
- Modems
- Network switches
Detailed and Complete Alternative Models
Some alternative models to the IS25LP080D-JNLE-TR include:
- W25Q80BVSNIG (Winbond)
- S25FL008A0LMFI011 (Cypress Semiconductor)
- MX25L8006EM2I-12G (Macronix)
- AT25SF081-SSHD-T (Microchip Technology)
These alternative models offer similar functionality and can be considered as replacements depending on specific requirements and compatibility.
Word count: 410 words
10 domande e risposte comuni relative all'applicazione di IS25LP080D-JNLE-TR nelle soluzioni tecniche
Sure! Here are 10 common questions and answers related to the application of IS25LP080D-JNLE-TR in technical solutions:
Q: What is IS25LP080D-JNLE-TR? A: IS25LP080D-JNLE-TR is a specific model of Serial NOR Flash memory chip manufactured by Integrated Silicon Solution Inc. It offers 8 megabits (1 megabyte) of storage capacity.
Q: What are the typical applications of IS25LP080D-JNLE-TR? A: IS25LP080D-JNLE-TR is commonly used in various technical solutions, including embedded systems, consumer electronics, automotive applications, industrial automation, and IoT devices.
Q: What is the interface protocol supported by IS25LP080D-JNLE-TR? A: IS25LP080D-JNLE-TR supports the Serial Peripheral Interface (SPI) protocol, which allows for high-speed data transfer between the flash memory and the microcontroller or processor.
Q: What is the voltage range supported by IS25LP080D-JNLE-TR? A: IS25LP080D-JNLE-TR operates at a voltage range of 2.7V to 3.6V, making it compatible with a wide range of electronic systems.
Q: What is the maximum clock frequency supported by IS25LP080D-JNLE-TR? A: IS25LP080D-JNLE-TR can operate at a maximum clock frequency of 104 MHz, enabling fast read and write operations.
Q: Does IS25LP080D-JNLE-TR support hardware and software protection features? A: Yes, IS25LP080D-JNLE-TR provides hardware and software protection features like write protection, block protection, and security registers to prevent unauthorized access or modification of data.
Q: Can IS25LP080D-JNLE-TR operate in extreme temperature conditions? A: Yes, IS25LP080D-JNLE-TR is designed to operate reliably in a wide temperature range, typically from -40°C to +85°C, making it suitable for harsh environments.
Q: What is the typical endurance of IS25LP080D-JNLE-TR? A: IS25LP080D-JNLE-TR has a typical endurance of 100,000 program/erase cycles, ensuring long-term reliability and durability.
Q: Does IS25LP080D-JNLE-TR support over-the-air (OTA) firmware updates? A: Yes, IS25LP080D-JNLE-TR can be used to store firmware or software updates, allowing for convenient OTA updates in connected devices.
Q: Are there any development tools or software libraries available for IS25LP080D-JNLE-TR? A: Yes, Integrated Silicon Solution Inc. provides development tools, software libraries, and documentation to assist developers in integrating IS25LP080D-JNLE-TR into their technical solutions.
Please note that the answers provided here are general and may vary depending on specific requirements and use cases. It's always recommended to refer to the official datasheet and documentation for accurate and detailed information about IS25LP080D-JNLE-TR.