Intersil
L'immagine può essere rappresentativa.
Vedi le specifiche per i dettagli del prodotto.
ISL6146DFUZ
vedi dettagli Schede tecniche

ISL6146DFUZ

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management
  • Characteristics: High-efficiency synchronous buck regulator
  • Package: 16-lead QFN package
  • Essence: Voltage regulator with advanced features
  • Packaging/Quantity: Tape and reel, 2500 units per reel

Specifications

  • Input Voltage Range: 4.5V to 18V
  • Output Voltage Range: 0.8V to 5.5V
  • Maximum Output Current: 6A
  • Switching Frequency: 500kHz
  • Efficiency: Up to 95%
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The ISL6146DFUZ has a 16-lead QFN package with the following pin configuration:

  1. VIN: Input voltage
  2. GND: Ground
  3. PGND: Power ground
  4. BOOT: Bootstrap capacitor connection
  5. LX: Switching node
  6. VCC: Supply voltage for internal circuitry
  7. EN: Enable pin
  8. SS/TRK: Soft-start/tracking control
  9. FB: Feedback voltage input
  10. COMP: Compensation pin
  11. OCSET: Overcurrent protection threshold setting
  12. SYNC: Synchronization input
  13. RT: External resistor for frequency setting
  14. AGND: Analog ground
  15. PGOOD: Power good indicator
  16. VOUT: Output voltage

Functional Features

  • High efficiency and low quiescent current
  • Wide input voltage range for versatile applications
  • Adjustable output voltage through external resistors
  • Soft-start and tracking capability for controlled startup
  • Overcurrent protection for enhanced reliability
  • Synchronization input for multi-phase operation
  • Power good indicator for system monitoring

Advantages and Disadvantages

Advantages: - High efficiency leads to reduced power consumption - Wide input voltage range allows for flexibility in different applications - Adjustable output voltage provides customization options - Soft-start and tracking features ensure smooth startup - Overcurrent protection enhances system reliability - Synchronization input enables multi-phase operation - Power good indicator aids in system monitoring

Disadvantages: - Limited maximum output current of 6A - Requires external components for proper operation

Working Principles

The ISL6146DFUZ is a high-efficiency synchronous buck regulator that converts a higher input voltage to a lower output voltage. It utilizes a switching mechanism to regulate the output voltage while minimizing power losses. The integrated circuit incorporates various control features such as soft-start, overcurrent protection, and synchronization input to ensure stable and reliable power management.

Detailed Application Field Plans

The ISL6146DFUZ is suitable for a wide range of applications, including but not limited to:

  1. Industrial equipment power supplies
  2. Telecommunications systems
  3. Networking devices
  4. Consumer electronics
  5. Automotive electronics
  6. LED lighting systems
  7. Battery-powered devices

Detailed and Complete Alternative Models

  1. ISL6146DEMO1Z: Evaluation board for ISL6146DFUZ
  2. ISL6146DIZ: 8-lead SOIC package variant
  3. ISL6146IRZ: 16-lead QFN package with exposed pad
  4. ISL6146HRTZ-T: 20-lead QFN package with increased thermal performance

These alternative models offer similar functionality and can be considered as substitutes for the ISL6146DFUZ based on specific application requirements.

Word count: 413 words

10 domande e risposte comuni relative all'applicazione di ISL6146DFUZ nelle soluzioni tecniche

Sure! Here are 10 common questions and answers related to the application of ISL6146DFUZ in technical solutions:

  1. Q: What is ISL6146DFUZ? A: ISL6146DFUZ is a high-performance, synchronous buck controller IC used for voltage regulation in various technical applications.

  2. Q: What is the input voltage range supported by ISL6146DFUZ? A: The input voltage range supported by ISL6146DFUZ is typically between 4.5V and 14V.

  3. Q: What is the output voltage range that can be achieved using ISL6146DFUZ? A: The output voltage range achievable with ISL6146DFUZ depends on the external components used, but it can typically range from 0.6V to 5.5V.

  4. Q: What is the maximum output current that ISL6146DFUZ can handle? A: ISL6146DFUZ can handle a maximum output current of up to 6A.

  5. Q: Does ISL6146DFUZ support adjustable switching frequency? A: Yes, ISL6146DFUZ supports adjustable switching frequency, allowing users to optimize performance based on their specific requirements.

  6. Q: Can ISL6146DFUZ operate in a synchronous rectification mode? A: Yes, ISL6146DFUZ can operate in synchronous rectification mode, which improves efficiency by reducing power losses.

  7. Q: Is there any protection mechanism built into ISL6146DFUZ? A: Yes, ISL6146DFUZ incorporates various protection features such as overcurrent protection, overvoltage protection, and thermal shutdown.

  8. Q: Can ISL6146DFUZ be used in automotive applications? A: Yes, ISL6146DFUZ is suitable for automotive applications as it meets the necessary requirements and standards.

  9. Q: What type of package does ISL6146DFUZ come in? A: ISL6146DFUZ is available in a compact 4x4mm QFN package, which is suitable for space-constrained designs.

  10. Q: Are there any evaluation boards or reference designs available for ISL6146DFUZ? A: Yes, Intersil (now Renesas Electronics) provides evaluation boards and reference designs to help users quickly prototype and implement solutions using ISL6146DFUZ.

Please note that the answers provided here are general and may vary depending on the specific datasheet and application notes provided by the manufacturer. It's always recommended to refer to the official documentation for accurate and up-to-date information.