Intersil
L'immagine può essere rappresentativa.
Vedi le specifiche per i dettagli del prodotto.
ICL3222CBZ
vedi dettagli Schede tecniche

ICL3222CBZ

Product Overview

Category

ICL3222CBZ belongs to the category of integrated circuits (ICs).

Use

The ICL3222CBZ is commonly used as a dual RS-232 transceiver. It provides two full-duplex channels, making it suitable for applications requiring communication between two devices using the RS-232 protocol.

Characteristics

  • Dual RS-232 transceiver
  • Full-duplex communication
  • Supports RS-232 voltage levels
  • Low power consumption
  • Wide operating voltage range
  • ESD protection on all pins

Package

The ICL3222CBZ is available in a small outline package (SOIC) with 16 pins. This package offers good thermal performance and ease of soldering.

Essence

The essence of the ICL3222CBZ lies in its ability to facilitate reliable and efficient communication between devices using the RS-232 protocol. It ensures accurate data transmission while providing protection against electrostatic discharge (ESD).

Packaging/Quantity

The ICL3222CBZ is typically packaged in reels or tubes, containing a specified quantity of ICs per package. The exact packaging and quantity may vary depending on the supplier.

Specifications

  • Supply Voltage: 3.0V to 5.5V
  • Data Rate: Up to 120kbps
  • Operating Temperature Range: -40°C to +85°C
  • Number of Channels: 2
  • Input/Output Logic Levels: RS-232

Detailed Pin Configuration

The ICL3222CBZ has a total of 16 pins, each serving a specific function. The pin configuration is as follows:

  1. VCC - Positive supply voltage
  2. GND - Ground reference
  3. T1OUT - Transmit data output for channel 1
  4. R1IN - Receive data input for channel 1
  5. T1IN - Transmit data input for channel 1
  6. R1OUT - Receive data output for channel 1
  7. SHDN - Shutdown control input (active low)
  8. NC - No connection
  9. R2OUT - Receive data output for channel 2
  10. T2IN - Transmit data input for channel 2
  11. R2IN - Receive data input for channel 2
  12. T2OUT - Transmit data output for channel 2
  13. C1+ - External capacitor connection for channel 1
  14. C1- - External capacitor connection for channel 1
  15. C2- - External capacitor connection for channel 2
  16. C2+ - External capacitor connection for channel 2

Functional Features

The ICL3222CBZ offers the following functional features:

  1. Dual-channel RS-232 transceiver: Enables simultaneous communication between two devices using the RS-232 protocol.
  2. Full-duplex operation: Allows data transmission in both directions simultaneously.
  3. Wide operating voltage range: Supports a wide range of supply voltages, making it compatible with various systems.
  4. ESD protection: Provides protection against electrostatic discharge on all pins, ensuring device reliability.

Advantages and Disadvantages

Advantages

  • Dual-channel design allows for efficient communication between two devices.
  • Full-duplex operation enables simultaneous data transmission in both directions.
  • Wide operating voltage range enhances compatibility with different systems.
  • ESD protection ensures device reliability.

Disadvantages

  • Limited data rate of up to 120kbps may not be suitable for high-speed applications.
  • Requires external capacitors for proper operation.

Working Principles

The ICL3222CBZ operates based on the RS-232 protocol, which uses voltage levels to represent data. It receives and transmits data through the respective input and output pins for each channel. The device ensures accurate data transmission by converting the RS-232 voltage levels to logic levels compatible with the connected devices.

Detailed Application Field Plans

The ICL3222CBZ finds applications in various fields where communication between devices using the RS-232 protocol is required. Some of the common application areas include:

  1. Industrial automation: Used for connecting PLCs (Programmable Logic Controllers) to other devices.
  2. Telecommunications: Facilitates communication between modems, routers, and other network equipment.
  3. Embedded systems: Enables communication between microcontrollers and external devices.
  4. Point-of-sale systems: Connects cash registers, barcode scanners, and receipt printers.
  5. Medical devices: Used in medical equipment for data exchange and control.

Detailed and Complete Alternative Models

  1. MAX3232 - Dual RS-232 transceiver with higher data rate capability.
  2. SP3232 - Low-power dual RS-232 transceiver with enhanced ESD protection.
  3. ADM3202 - Dual RS-232 transceiver with integrated charge pump for

10 domande e risposte comuni relative all'applicazione di ICL3222CBZ nelle soluzioni tecniche

Sure! Here are 10 common questions and answers related to the application of ICL3222CBZ in technical solutions:

1. What is ICL3222CBZ? ICL3222CBZ is a dual RS-232 transceiver IC (Integrated Circuit) that provides two-way communication between devices using the RS-232 protocol.

2. What is the operating voltage range of ICL3222CBZ? The operating voltage range of ICL3222CBZ is typically between 3V and 5.5V.

3. Can ICL3222CBZ be used for both transmitting and receiving data? Yes, ICL3222CBZ can be used for both transmitting and receiving data, as it is a dual transceiver.

4. What is the maximum data rate supported by ICL3222CBZ? ICL3222CBZ supports a maximum data rate of 250 kbps.

5. Does ICL3222CBZ have built-in ESD protection? Yes, ICL3222CBZ has built-in ESD (Electrostatic Discharge) protection, which helps protect the IC from damage caused by static electricity.

6. Can ICL3222CBZ be used in industrial applications? Yes, ICL3222CBZ is suitable for use in industrial applications due to its wide operating voltage range and robust design.

7. Is ICL3222CBZ compatible with TTL logic levels? Yes, ICL3222CBZ is compatible with TTL (Transistor-Transistor Logic) logic levels, making it easy to interface with other TTL-compatible devices.

8. Does ICL3222CBZ require external capacitors for operation? Yes, ICL3222CBZ requires external capacitors for proper operation. The datasheet provides guidelines on selecting the appropriate capacitors.

9. Can ICL3222CBZ be used in battery-powered applications? Yes, ICL3222CBZ can be used in battery-powered applications as it operates within a wide voltage range and has low power consumption.

10. Are there any application notes or reference designs available for ICL3222CBZ? Yes, the manufacturer of ICL3222CBZ provides application notes and reference designs that can help users understand and implement the IC in their technical solutions.

Please note that the answers provided here are general and may vary depending on specific requirements and use cases. It is always recommended to refer to the datasheet and consult with the manufacturer for detailed information.