Infineon Technologies
L'immagine può essere rappresentativa.
Vedi le specifiche per i dettagli del prodotto.
IRS2580DSPBF
vedi dettagli Schede tecniche

IRS2580DSPBF

Product Overview

Category: Integrated Circuit (IC)

Use: The IRS2580DSPBF is a high-performance integrated circuit designed for use in power electronics applications. It is specifically used for driving and controlling power MOSFETs in switch-mode power supplies.

Characteristics: - High efficiency - Low standby power consumption - Fast switching speed - Wide input voltage range - Protection features against overcurrent, overvoltage, and overtemperature

Package: The IRS2580DSPBF is available in a compact and industry-standard 16-pin SOIC (Small Outline Integrated Circuit) package.

Essence: This IC serves as a crucial component in power supply systems, enabling efficient and reliable control of power MOSFETs.

Packaging/Quantity: The IRS2580DSPBF is typically sold in reels containing 250 units per reel.

Specifications

  • Input Voltage Range: 10V to 20V
  • Output Voltage Range: 0V to 15V
  • Maximum Output Current: 5A
  • Switching Frequency: 100kHz to 1MHz
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

The IRS2580DSPBF features the following pin configuration:

  1. VCC: Power supply voltage input
  2. GND: Ground reference
  3. SD: Shutdown control input
  4. FB: Feedback voltage input
  5. COMP: Compensation pin for loop stability
  6. CS: Current sense input
  7. RT: Timing resistor connection for oscillator frequency control
  8. CT: Timing capacitor connection for oscillator frequency control
  9. SS: Soft-start capacitor connection
  10. DRVH: High-side gate driver output
  11. DRVL: Low-side gate driver output
  12. HO: High-side floating output
  13. LO: Low-side floating output
  14. VDD: Power supply voltage input for gate drivers
  15. VSS: Ground reference for gate drivers
  16. NC: No connection

Functional Features

  • Integrated high-voltage gate driver for power MOSFETs
  • Adaptive dead-time control for optimal switching performance
  • Programmable soft-start function for controlled startup
  • Overcurrent protection with adjustable threshold
  • Overvoltage protection with adjustable threshold
  • Overtemperature protection with thermal shutdown

Advantages and Disadvantages

Advantages: - High efficiency leads to energy savings - Fast switching speed enables compact designs - Wide input voltage range allows for versatile applications - Protection features enhance system reliability

Disadvantages: - Limited maximum output current may restrict certain high-power applications - Requires external components for complete power supply implementation

Working Principles

The IRS2580DSPBF operates based on a pulse-width modulation (PWM) technique. It generates a PWM signal that controls the conduction time of the power MOSFETs, regulating the output voltage and current. The integrated gate driver provides the necessary voltage and current levels to drive the power MOSFETs efficiently.

Detailed Application Field Plans

The IRS2580DSPBF is commonly used in various power electronics applications, including: - Switch-mode power supplies (SMPS) - LED lighting systems - Motor drives - Battery chargers - Uninterruptible power supplies (UPS)

Detailed and Complete Alternative Models

  1. IRS2186DSPBF: Similar functionality with dual high- and low-side gate drivers.
  2. IRS20957SPBF: Enhanced version with additional protection features and higher output current capability.
  3. IRS2980DSPBF: Integrated IC with power factor correction (PFC) functionality.

These alternative models offer similar functionalities to the IRS2580DSPBF, catering to different application requirements.

Word count: 452 words

10 domande e risposte comuni relative all'applicazione di IRS2580DSPBF nelle soluzioni tecniche

Sure! Here are 10 common questions and answers related to the application of IRS2580DSPBF in technical solutions:

  1. Q: What is IRS2580DSPBF? A: IRS2580DSPBF is a high-performance integrated power stage (IPS) solution designed for driving high-current LEDs in lighting applications.

  2. Q: What are the key features of IRS2580DSPBF? A: The key features of IRS2580DSPBF include high efficiency, low electromagnetic interference (EMI), over-temperature protection, and over-current protection.

  3. Q: How does IRS2580DSPBF achieve high efficiency? A: IRS2580DSPBF utilizes advanced control techniques such as synchronous rectification and adaptive dead-time control to maximize power conversion efficiency.

  4. Q: Can IRS2580DSPBF be used in both AC and DC input applications? A: Yes, IRS2580DSPBF can be used in both AC and DC input applications, making it versatile for various lighting solutions.

  5. Q: What is the maximum current that IRS2580DSPBF can handle? A: IRS2580DSPBF can handle a maximum continuous output current of up to 2.5A.

  6. Q: Does IRS2580DSPBF support dimming functionality? A: Yes, IRS2580DSPBF supports analog and PWM dimming, allowing for flexible control of LED brightness.

  7. Q: Is IRS2580DSPBF compatible with different types of LEDs? A: Yes, IRS2580DSPBF is compatible with a wide range of LEDs, including high-power LEDs and multi-chip arrays.

  8. Q: Can IRS2580DSPBF operate in high-temperature environments? A: Yes, IRS2580DSPBF is designed to operate reliably in high-temperature environments, thanks to its over-temperature protection feature.

  9. Q: What is the typical input voltage range for IRS2580DSPBF? A: The typical input voltage range for IRS2580DSPBF is 8V to 18V.

  10. Q: Are there any application notes or reference designs available for IRS2580DSPBF? A: Yes, International Rectifier provides application notes and reference designs that can help engineers in implementing IRS2580DSPBF in their technical solutions.

Please note that these answers are general and may vary depending on specific design considerations and requirements.