Infineon Technologies
L'immagine può essere rappresentativa.
Vedi le specifiche per i dettagli del prodotto.
IRGR4610DPBF
vedi dettagli Schede tecniche

IRGR4610DPBF

Product Overview

Category: Power MOSFET
Use: Switching applications in power supplies, motor control, and other high current applications
Characteristics: High voltage capability, low on-resistance, fast switching speed
Package: D2Pak-7
Essence: Power MOSFET for high current switching applications
Packaging/Quantity: Available in reels of 250 units

Specifications

  • Voltage Rating: 100V
  • Continuous Drain Current: 24A
  • RDS(ON): 9.5mΩ
  • Gate Threshold Voltage: 2V
  • Total Gate Charge: 40nC
  • Maximum Power Dissipation: 2.5W

Detailed Pin Configuration

  1. Gate
  2. Drain
  3. Source
  4. N/C
  5. N/C
  6. Source
  7. Drain

Functional Features

  • High voltage capability allows for use in various power applications
  • Low on-resistance minimizes power loss and heat generation
  • Fast switching speed enables efficient operation in high-frequency circuits

Advantages

  • Suitable for high current applications
  • Low power dissipation
  • Robust and reliable performance

Disadvantages

  • May require additional circuitry for driving the gate at higher frequencies
  • Sensitive to static electricity and voltage spikes

Working Principles

The IRGR4610DPBF operates based on the principles of field-effect transistors, where the gate voltage controls the flow of current between the drain and source terminals. When a sufficient gate voltage is applied, the MOSFET allows current to pass through, enabling it to function as a switch in various power applications.

Detailed Application Field Plans

  • Power supplies
  • Motor control systems
  • High current switching circuits

Detailed and Complete Alternative Models

  1. IRFR4610PbF
  2. IRFS4610PbF
  3. IRFH4610PbF
  4. IRFSL4610PbF

In conclusion, the IRGR4610DPBF is a high-performance Power MOSFET suitable for a wide range of high current switching applications. Its combination of high voltage capability, low on-resistance, and fast switching speed makes it an ideal choice for power supplies, motor control, and other high current applications.

[Word count: 305]

10 domande e risposte comuni relative all'applicazione di IRGR4610DPBF nelle soluzioni tecniche

  1. What is IRGR4610DPBF?

    • IRGR4610DPBF is a high-speed, low-side gate driver IC designed for use in applications such as motor control, power supplies, and inverters.

  2. What is the maximum operating frequency of IRGR4610DPBF?

    • The maximum operating frequency of IRGR4610DPBF is typically around 2MHz.

  3. What is the input voltage range for IRGR4610DPBF?

    • The input voltage range for IRGR4610DPBF is typically between 4.5V and 18V.

  4. What is the output current capability of IRGR4610DPBF?

    • IRGR4610DPBF has an output current capability of up to 10A peak source and 10A peak sink.

  5. Is IRGR4610DPBF suitable for driving MOSFETs and IGBTs?

    • Yes, IRGR4610DPBF is suitable for driving both MOSFETs and IGBTs.

  6. What are the key features of IRGR4610DPBF?

    • Some key features of IRGR4610DPBF include undervoltage lockout protection, matched propagation delay for both channels, and negative voltage spike immunity.

  7. Can IRGR4610DPBF be used in automotive applications?

    • Yes, IRGR4610DPBF is suitable for use in automotive applications due to its robust design and performance characteristics.

  8. What is the thermal resistance of IRGR4610DPBF?

    • The thermal resistance of IRGR4610DPBF is typically around 15°C/W.

  9. Does IRGR4610DPBF have integrated deadtime control?

    • Yes, IRGR4610DPBF features integrated deadtime control to prevent shoot-through in half-bridge configurations.

  10. What are the recommended applications for IRGR4610DPBF?

    • Recommended applications for IRGR4610DPBF include motor drives, solar inverters, UPS systems, and industrial power supplies.