Infineon Technologies
L'immagine può essere rappresentativa.
Vedi le specifiche per i dettagli del prodotto.
BTN7960S

BTN7960S

Product Overview

Category

BTN7960S belongs to the category of power integrated circuits.

Use

It is primarily used for controlling high-current loads in automotive applications.

Characteristics

  • High current capability
  • Low on-resistance
  • Overtemperature protection
  • Short-circuit protection
  • Overvoltage protection

Package

BTN7960S is available in a multi-power SOIC package.

Essence

The essence of BTN7960S lies in its ability to efficiently control high-current loads while providing various protection features.

Packaging/Quantity

Each package of BTN7960S contains one power integrated circuit.

Specifications

  • Maximum supply voltage: 40V
  • Continuous output current: 43A
  • RDS(on) (per channel): 8.5mΩ
  • Operating temperature range: -40°C to +150°C

Detailed Pin Configuration

BTN7960S has a total of 20 pins, which are configured as follows:

  1. IN1: Input pin for channel 1
  2. GND: Ground connection
  3. OUT1: Output pin for channel 1
  4. VCC: Positive supply voltage
  5. EN1: Enable pin for channel 1
  6. IN2: Input pin for channel 2
  7. GND: Ground connection
  8. OUT2: Output pin for channel 2
  9. VCC: Positive supply voltage
  10. EN2: Enable pin for channel 2
  11. DIAG1: Diagnostic output for channel 1
  12. GND: Ground connection
  13. VS: Sense voltage input
  14. GND: Ground connection
  15. DIAG2: Diagnostic output for channel 2
  16. GND: Ground connection
  17. NC: No connection
  18. GND: Ground connection
  19. NC: No connection
  20. GND: Ground connection

Functional Features

  • High current handling capability for automotive applications
  • Overtemperature protection ensures safe operation under extreme conditions
  • Short-circuit protection prevents damage to the circuitry
  • Overvoltage protection safeguards against voltage spikes

Advantages and Disadvantages

Advantages

  • High current capability allows for efficient control of heavy loads
  • Comprehensive protection features ensure reliable operation
  • Suitable for automotive applications due to its robustness and temperature range

Disadvantages

  • Limited pin configuration options may restrict certain application scenarios
  • Higher cost compared to traditional discrete components

Working Principles

BTN7960S operates by receiving input signals through the IN1 and IN2 pins, which control the output channels OUT1 and OUT2, respectively. The enable pins (EN1 and EN2) activate or deactivate the corresponding channels. The diagnostic outputs (DIAG1 and DIAG2) provide feedback on the status of each channel.

Detailed Application Field Plans

BTN7960S finds extensive use in various automotive applications, including:

  1. Electric power steering systems
  2. Engine cooling fan control
  3. Electric vehicle powertrain control
  4. Headlight control modules
  5. HVAC blower motor control

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to BTN7960S are:

  1. BTS7960B
  2. BTS7960B Smart Power Switch
  3. TLE5206-2G
  4. TLE5206-2S
  5. VNH2SP30-E

These models can be considered as alternatives based on specific requirements and compatibility with the target application.

Word count: 529 words

10 domande e risposte comuni relative all'applicazione di BTN7960S nelle soluzioni tecniche

Sure! Here are 10 common questions and answers related to the application of BTN7960S in technical solutions:

  1. Q: What is BTN7960S? A: BTN7960S is a high-current, half-bridge motor driver IC commonly used in automotive applications.

  2. Q: What is the maximum current rating of BTN7960S? A: The maximum current rating of BTN7960S is typically around 43A.

  3. Q: Can BTN7960S be used for both DC and AC motor control? A: No, BTN7960S is specifically designed for DC motor control applications.

  4. Q: What voltage range does BTN7960S support? A: BTN7960S can support a wide voltage range, typically from 5V to 40V.

  5. Q: Is BTN7960S suitable for controlling small motors? A: Yes, BTN7960S can be used to control small motors as well as larger ones, depending on the specific requirements.

  6. Q: Does BTN7960S have built-in protection features? A: Yes, BTN7960S includes various protection features such as overcurrent protection, overtemperature protection, and short-circuit protection.

  7. Q: Can BTN7960S be controlled using PWM signals? A: Yes, BTN7960S can be easily controlled using PWM (Pulse Width Modulation) signals for precise speed control.

  8. Q: What is the typical operating frequency range of BTN7960S? A: BTN7960S can operate at frequencies ranging from a few hundred Hz up to several kHz.

  9. Q: Can BTN7960S be used in battery-powered applications? A: Yes, BTN7960S can be used in battery-powered applications as it supports a wide voltage range and has low power consumption.

  10. Q: Are there any application examples where BTN7960S is commonly used? A: Yes, BTN7960S is commonly used in various automotive applications such as electric power steering systems, HVAC blowers, and windshield wiper control.

Please note that the answers provided here are general and may vary depending on the specific implementation and requirements of your technical solution.