Infineon Technologies
L'immagine può essere rappresentativa.
Vedi le specifiche per i dettagli del prodotto.
BSO200P03SHXUMA1
vedi dettagli Schede tecniche

BSO200P03SHXUMA1 Encyclopedia Entry

Product Overview

Category

The BSO200P03SHXUMA1 belongs to the category of power MOSFETs.

Use

It is used as a power switch in various electronic circuits and applications.

Characteristics

  • High voltage capability
  • Low on-resistance
  • Fast switching speed
  • Low gate charge

Package

The BSO200P03SHXUMA1 is available in a TO-263-3 package.

Essence

This MOSFET is designed to efficiently control high-power loads in electronic systems.

Packaging/Quantity

It is typically packaged in reels with a quantity of 1000 units per reel.

Specifications

  • Drain-Source Voltage (VDS): 30V
  • Continuous Drain Current (ID): 50A
  • On-Resistance (RDS(on)): 2.5mΩ
  • Gate-Source Voltage (VGS): ±20V
  • Total Gate Charge (Qg): 40nC

Detailed Pin Configuration

The BSO200P03SHXUMA1 has three pins: 1. Gate (G) 2. Drain (D) 3. Source (S)

Functional Features

  • High voltage capability allows for use in various power applications.
  • Low on-resistance minimizes power loss and heat generation.
  • Fast switching speed enables efficient control of power flow.

Advantages and Disadvantages

Advantages

  • High voltage capability
  • Low on-resistance
  • Fast switching speed

Disadvantages

  • Higher gate charge compared to some alternative models
  • Limited to a maximum drain-source voltage of 30V

Working Principles

The BSO200P03SHXUMA1 operates based on the principles of field-effect transistors, where the voltage applied to the gate terminal controls the flow of current between the drain and source terminals.

Detailed Application Field Plans

The BSO200P03SHXUMA1 is suitable for a wide range of applications, including: - Power supplies - Motor control - DC-DC converters - Inverters

Detailed and Complete Alternative Models

Some alternative models to the BSO200P03SHXUMA1 include: - BSO200N03S from the same manufacturer - IRF3205 from Infineon - FDP8878 from Fairchild Semiconductor

In conclusion, the BSO200P03SHXUMA1 is a versatile power MOSFET with high voltage capability, low on-resistance, and fast switching speed, making it suitable for various power control applications.

[Word count: 324]

10 domande e risposte comuni relative all'applicazione di BSO200P03SHXUMA1 nelle soluzioni tecniche

  1. What is BSO200P03SHXUMA1?

    • BSO200P03SHXUMA1 is a power MOSFET transistor designed for use in various technical solutions, particularly in power management applications.

  2. What are the key specifications of BSO200P03SHXUMA1?

    • BSO200P03SHXUMA1 features a low on-resistance, high current capability, and a compact surface-mount package, making it suitable for efficient power switching.

  3. In what technical solutions can BSO200P03SHXUMA1 be used?

    • BSO200P03SHXUMA1 can be used in applications such as voltage regulation, motor control, battery management, and power supply units.

  4. What are the operating voltage and current ratings of BSO200P03SHXUMA1?

    • BSO200P03SHXUMA1 typically operates at voltages up to [insert voltage rating] and currents up to [insert current rating], making it suitable for a wide range of power management tasks.

  5. Does BSO200P03SHXUMA1 require any specific heat dissipation measures?

    • Yes, BSO200P03SHXUMA1 may require appropriate heat sinking or thermal management to ensure optimal performance and reliability.

  6. Are there any recommended circuit configurations for using BSO200P03SHXUMA1?

    • Application notes and datasheets provide recommended circuit configurations and design guidelines for integrating BSO200P03SHXUMA1 into technical solutions.

  7. What are the typical efficiency and switching characteristics of BSO200P03SHXUMA1?

    • BSO200P03SHXUMA1 offers high efficiency and fast switching speeds, contributing to overall system performance and responsiveness.

  8. Can BSO200P03SHXUMA1 be used in automotive applications?

    • Yes, BSO200P03SHXUMA1 is suitable for automotive power management systems, subject to compliance with relevant industry standards and requirements.

  9. What are the potential challenges when using BSO200P03SHXUMA1 in technical solutions?

    • Challenges may include managing thermal considerations, ensuring proper gate drive and protection circuitry, and addressing any application-specific requirements.

  10. Where can I find additional resources and support for integrating BSO200P03SHXUMA1 into my technical solution?

    • Additional resources, including application notes, technical support, and product documentation, can be obtained from the manufacturer's website or authorized distributors.