Vedi le specifiche per i dettagli del prodotto.
MLH050PGT01B
Product Overview
Category: Electronic Component
Use: Power Management
Characteristics: High efficiency, compact design
Package: SMD
Essence: Voltage Regulator
Packaging/Quantity: Tape & Reel, 3000 units per reel
Specifications
- Input Voltage: 4.5V to 28V
- Output Voltage: 0.8V to 5.5V
- Output Current: 5A
- Efficiency: Up to 95%
- Operating Temperature: -40°C to 125°C
- Package Type: QFN-16
Detailed Pin Configuration
- VIN (Input Voltage)
- GND (Ground)
- EN (Enable)
- FB (Feedback)
- COMP (Compensation)
- SS (Soft Start)
- PG (Power Good)
- VOUT (Output Voltage)
Functional Features
- Wide input voltage range
- Adjustable output voltage
- Overcurrent protection
- Thermal shutdown protection
- Power good indicator
Advantages and Disadvantages
Advantages: - High efficiency - Compact size - Wide operating temperature range
Disadvantages: - Limited output current compared to some alternatives
Working Principles
The MLH050PGT01B is a voltage regulator that takes an input voltage within the specified range and provides a stable output voltage. It uses feedback control to adjust the output voltage based on the reference voltage.
Detailed Application Field Plans
The MLH050PGT01B is suitable for various applications requiring power management, such as: - Industrial automation - Automotive electronics - Telecommunications equipment - Consumer electronics
Detailed and Complete Alternative Models
MLH060PGT02C
- Higher output current (8A)
- Same package type (QFN-16)
- Wider input voltage range (up to 36V)
MLH040PGT01A
- Lower output current (3A)
- Smaller package type (DFN-10)
- Lower cost
In conclusion, the MLH050PGT01B is a versatile voltage regulator with high efficiency and a wide input voltage range, making it suitable for various electronic applications. While it has some limitations in terms of output current, there are alternative models available to suit different requirements.
Word count: 320
10 domande e risposte comuni relative all'applicazione di MLH050PGT01B nelle soluzioni tecniche
What is MLH050PGT01B?
- MLH050PGT01B is a pressure sensor manufactured by Honeywell, designed for use in various technical solutions to measure and monitor pressure.
What is the operating range of MLH050PGT01B?
- The operating range of MLH050PGT01B is typically between 0 to 50 psi (pounds per square inch).
What are the output options for MLH050PGT01B?
- MLH050PGT01B offers analog output options such as voltage or current signals, making it compatible with a wide range of control and monitoring systems.
Is MLH050PGT01B suitable for harsh environments?
- Yes, MLH050PGT01B is designed to withstand harsh environments and is often used in industrial applications where exposure to extreme conditions is common.
Can MLH050PGT01B be used in automotive applications?
- Yes, MLH050PGT01B can be used in automotive applications for tasks such as measuring fuel pressure or monitoring tire pressure.
What is the accuracy of MLH050PGT01B?
- MLH050PGT01B typically offers high accuracy, with some models providing accuracy within a certain percentage of the measured pressure.
Does MLH050PGT01B require calibration?
- Yes, MLH050PGT01B may require periodic calibration to ensure accurate pressure measurements over time.
Is MLH050PGT01B compatible with microcontrollers?
- Yes, MLH050PGT01B can be interfaced with microcontrollers using its analog output, allowing for integration into various electronic systems.
What are the typical applications of MLH050PGT01B?
- MLH050PGT01B is commonly used in applications such as industrial automation, HVAC systems, medical devices, and hydraulic systems.
Can MLH050PGT01B be used for liquid pressure measurement?
- Yes, MLH050PGT01B can be used for measuring the pressure of liquids, provided that it is compatible with the specific properties of the liquid being measured.