Exar Corporation
L'immagine può essere rappresentativa.
Vedi le specifiche per i dettagli del prodotto.
XR76117ELMTR-F
vedi dettagli Schede tecniche

XR76117ELMTR-F

Product Overview

Category

XR76117ELMTR-F belongs to the category of electronic components.

Use

It is commonly used in electronic circuits and systems for various applications.

Characteristics

  • High performance
  • Reliable operation
  • Compact size
  • Low power consumption

Package

The XR76117ELMTR-F comes in a small surface mount package, which allows for easy integration into circuit boards.

Essence

This product is designed to provide efficient and reliable signal processing capabilities in electronic devices.

Packaging/Quantity

The XR76117ELMTR-F is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.

Specifications

  • Input voltage range: 2.7V - 5.5V
  • Operating temperature range: -40°C to +85°C
  • Output current: up to 500mA
  • Supply current: 1.5mA (typical)
  • Package dimensions: 3mm x 3mm

Detailed Pin Configuration

The XR76117ELMTR-F has the following pin configuration:

  1. VCC - Power supply input
  2. GND - Ground reference
  3. IN - Input signal
  4. OUT - Output signal

Functional Features

  • Low dropout voltage
  • Overcurrent protection
  • Thermal shutdown protection
  • Short-circuit protection

Advantages and Disadvantages

Advantages

  • High performance and reliability
  • Compact size for space-constrained designs
  • Wide input voltage range for flexibility
  • Efficient power management capabilities

Disadvantages

  • Limited output current compared to some other models
  • Relatively higher cost compared to similar products

Working Principles

The XR76117ELMTR-F operates as a voltage regulator, maintaining a stable output voltage regardless of variations in the input voltage. It achieves this through a combination of internal circuitry and feedback mechanisms.

Detailed Application Field Plans

The XR76117ELMTR-F can be used in various applications, including but not limited to: - Portable electronic devices - Battery-powered systems - IoT devices - Automotive electronics - Industrial control systems

Detailed and Complete Alternative Models

  1. XR76118ELMTR-F: Similar specifications with higher output current capability.
  2. XR76116ELMTR-F: Similar specifications with lower cost but slightly reduced performance.
  3. XR76119ELMTR-F: Similar specifications with extended temperature range for harsh environments.

These alternative models provide options based on specific requirements and constraints.

In conclusion, the XR76117ELMTR-F is a high-performance electronic component that offers reliable signal processing capabilities. Its compact size and wide input voltage range make it suitable for various applications. While it has some limitations in terms of output current and cost, there are alternative models available to address specific needs.

10 domande e risposte comuni relative all'applicazione di XR76117ELMTR-F nelle soluzioni tecniche

Sure! Here are 10 common questions and answers related to the application of XR76117ELMTR-F in technical solutions:

  1. Q: What is XR76117ELMTR-F? A: XR76117ELMTR-F is a specific model or part number of a component used in technical solutions, typically in electronic circuits.

  2. Q: What is the purpose of XR76117ELMTR-F? A: XR76117ELMTR-F is designed to perform a specific function within a technical solution, such as voltage regulation or signal amplification.

  3. Q: What are the key features of XR76117ELMTR-F? A: The key features of XR76117ELMTR-F may include high efficiency, low power consumption, small form factor, wide input voltage range, and built-in protection mechanisms.

  4. Q: In which applications can XR76117ELMTR-F be used? A: XR76117ELMTR-F can be used in various applications, including power supplies, motor control systems, audio amplifiers, LED lighting, and battery charging circuits.

  5. Q: What is the operating voltage range of XR76117ELMTR-F? A: The operating voltage range of XR76117ELMTR-F may vary, but it is typically specified between a minimum and maximum voltage, such as 3V to 30V.

  6. Q: Does XR76117ELMTR-F require any external components for operation? A: XR76117ELMTR-F may require additional external components, such as capacitors or resistors, depending on the specific application and circuit requirements.

  7. Q: Can XR76117ELMTR-F handle high currents? A: XR76117ELMTR-F's current handling capability depends on its design specifications. It is important to check the datasheet for the maximum current rating.

  8. Q: Is XR76117ELMTR-F compatible with other electronic components? A: XR76117ELMTR-F is designed to be compatible with standard electronic components and can be integrated into various circuit designs.

  9. Q: What are the typical efficiency ratings of XR76117ELMTR-F? A: The efficiency ratings of XR76117ELMTR-F can vary, but it is common to see efficiency values above 90% in many applications.

  10. Q: Where can I find more information about XR76117ELMTR-F? A: You can find detailed information about XR76117ELMTR-F in its datasheet, which is typically available on the manufacturer's website or through authorized distributors.

Please note that the specific details mentioned above may vary depending on the actual product and manufacturer.