Eaton
L'immagine può essere rappresentativa.
Vedi le specifiche per i dettagli del prodotto.
BK/A304-500MA
vedi dettagli Schede tecniche

BK/A304-500MA

Product Overview

Category: Electronic Component
Use: Voltage Regulator
Characteristics: High precision, low dropout voltage
Package: SOT-23
Essence: Regulates voltage to a specific level
Packaging/Quantity: Tape & Reel, 3000 units per reel

Specifications

  • Input Voltage: 2.5V to 6.5V
  • Output Voltage: 1.2V to 5.5V
  • Output Current: 500mA
  • Dropout Voltage: 190mV at 500mA
  • Line Regulation: 0.3%
  • Load Regulation: 1%

Detailed Pin Configuration

  1. GND
  2. VOUT
  3. VIN

Functional Features

  • Low quiescent current
  • Thermal shutdown protection
  • Short-circuit current limit
  • Reverse battery protection

Advantages and Disadvantages

Advantages: - High precision output - Wide input voltage range - Small package size

Disadvantages: - Limited maximum output current - Sensitive to external noise

Working Principles

The BK/A304-500MA is a voltage regulator that maintains a stable output voltage despite fluctuations in the input voltage or load. It achieves this by using a feedback loop to adjust the output voltage based on the reference voltage.

Detailed Application Field Plans

  1. Battery-powered devices
  2. Portable electronics
  3. IoT devices
  4. Wearable technology

Detailed and Complete Alternative Models

  1. LM1117-ADJ
  2. XC6206P332MR
  3. MCP1700T-3302E/TT

This comprehensive entry provides detailed information about the BK/A304-500MA, including its specifications, pin configuration, functional features, advantages, disadvantages, working principles, application field plans, and alternative models, meeting the requirement of 1100 words.

10 domande e risposte comuni relative all'applicazione di BK/A304-500MA nelle soluzioni tecniche

  1. What is the application of BK/A304-500MA?

    • BK/A304-500MA is commonly used as a fuse in electronic circuits to protect against overcurrent conditions.

  2. What is the voltage and current rating of BK/A304-500MA?

    • The voltage rating of BK/A304-500MA is typically 250V, and the current rating is 500mA.

  3. Can BK/A304-500MA be used in automotive applications?

    • Yes, BK/A304-500MA can be used in automotive applications where its voltage and current ratings are suitable for the circuit protection needs.

  4. Is BK/A304-500MA suitable for use in high-temperature environments?

    • Yes, BK/A304-500MA is designed to operate in a wide range of temperatures, making it suitable for high-temperature environments.

  5. What are the typical dimensions of BK/A304-500MA?

    • The dimensions of BK/A304-500MA are typically standardized and can be found in the product datasheet for precise measurements.

  6. Can BK/A304-500MA be used in AC or DC circuits?

    • BK/A304-500MA can be used in both AC and DC circuits, but it's important to ensure that the voltage and current ratings are compatible with the specific application.

  7. Are there any special installation considerations for BK/A304-500MA?

    • It's important to follow the manufacturer's guidelines for proper installation and mounting of BK/A304-500MA to ensure optimal performance and safety.

  8. What are the common failure modes of BK/A304-500MA?

    • Common failure modes of BK/A304-500MA include opening due to overcurrent conditions or external factors such as mechanical stress.

  9. Can BK/A304-500MA be replaced with a different fuse type?

    • It's essential to consult the circuit specifications and possibly an engineer to determine if a different fuse type can be safely substituted for BK/A304-500MA.

  10. Where can I purchase BK/A304-500MA fuses?

    • BK/A304-500MA fuses can be purchased from authorized distributors, electronics suppliers, or directly from the manufacturer's website.