Vedi le specifiche per i dettagli del prodotto.
DDTA143ZUA-7
Product Overview
Category
The DDTA143ZUA-7 belongs to the category of semiconductor devices.
Use
It is commonly used as a general-purpose PNP transistor in electronic circuits.
Characteristics
- Low power dissipation
- High current gain
- Small package size
Package
The DDTA143ZUA-7 is typically available in a SOT-323 package.
Essence
This product is essential for amplifying and switching electronic signals in various applications.
Packaging/Quantity
It is usually packaged in reels with a quantity of 3000 units per reel.
Specifications
- Collector-Base Voltage: -50V
- Collector Current: -100mA
- Total Power Dissipation: 200mW
- Transition Frequency: 250MHz
- Operating Temperature Range: -55°C to +150°C
Detailed Pin Configuration
The DDTA143ZUA-7 has three pins: 1. Emitter (E) 2. Base (B) 3. Collector (C)
Functional Features
- High current gain
- Low saturation voltage
- Fast switching speed
Advantages
- Small package size
- Suitable for low-power applications
- Wide operating temperature range
Disadvantages
- Limited maximum collector current
- Relatively low transition frequency
Working Principles
The DDTA143ZUA-7 operates based on the principles of bipolar junction transistors, where the flow of current is controlled by the application of a small signal at the base terminal.
Detailed Application Field Plans
This transistor is widely used in: - Audio amplifiers - Signal amplification circuits - Switching circuits
Detailed and Complete Alternative Models
Some alternative models to the DDTA143ZUA-7 include: - BC557 - 2N3906 - S8550
In conclusion, the DDTA143ZUA-7 is a versatile PNP transistor with specific characteristics that make it suitable for various electronic applications. Its compact size and high current gain make it an ideal choice for low-power circuit designs.
[Word count: 298]
10 domande e risposte comuni relative all'applicazione di DDTA143ZUA-7 nelle soluzioni tecniche
What is DDTA143ZUA-7?
- DDTA143ZUA-7 is a specific model of semiconductor device, commonly used in electronic circuits for amplification and switching applications.
What are the key specifications of DDTA143ZUA-7?
- The key specifications include its maximum collector current, voltage ratings, gain, and frequency response.
How is DDTA143ZUA-7 typically used in technical solutions?
- DDTA143ZUA-7 is often used as a small-signal transistor in various technical solutions such as audio amplifiers, signal processing circuits, and sensor interfaces.
What are the advantages of using DDTA143ZUA-7 in technical solutions?
- Some advantages include its small size, low power consumption, and high reliability, making it suitable for compact and energy-efficient designs.
Are there any limitations or considerations when using DDTA143ZUA-7?
- It's important to consider its operating temperature range, voltage and current requirements, and potential thermal management needs in certain applications.
Can DDTA143ZUA-7 be used in high-frequency applications?
- Yes, DDTA143ZUA-7 has a frequency response that makes it suitable for use in moderate to high-frequency applications.
What are some common circuit configurations for integrating DDTA143ZUA-7?
- Common configurations include common emitter, common collector, and common base setups, depending on the specific application requirements.
Is DDTA143ZUA-7 compatible with surface mount technology (SMT)?
- Yes, DDTA143ZUA-7 is available in SMT packages, making it suitable for modern PCB assembly processes.
What are the typical operating conditions for DDTA143ZUA-7?
- Typical operating conditions include specified voltage and current levels, temperature range, and signal input/output requirements.
Where can I find detailed technical documentation for DDTA143ZUA-7?
- Detailed technical documentation, including datasheets and application notes, can be obtained from the manufacturer's website or authorized distributors.