Diodes Incorporated
L'immagine può essere rappresentativa.
Vedi le specifiche per i dettagli del prodotto.
D5V0H1B2LP-7B
vedi dettagli Schede tecniche

D5V0H1B2LP-7B

Product Overview

Category

The D5V0H1B2LP-7B belongs to the category of voltage regulators.

Use

It is used to regulate and stabilize voltage in electronic circuits.

Characteristics

  • Input Voltage Range: 6.0V to 36V
  • Output Voltage: 5.0V
  • Maximum Output Current: 1.2A
  • Low Dropout Voltage: 0.3V at 1.2A
  • Package: TO-252-4L
  • Operating Temperature Range: -40°C to 125°C
  • Low ESR Ceramic Capacitor Compatible

Package

The D5V0H1B2LP-7B is available in a TO-252-4L package.

Essence

This voltage regulator provides stable and regulated 5.0V output from an input voltage range of 6.0V to 36V.

Packaging/Quantity

The D5V0H1B2LP-7B is typically sold in reels with a specific quantity per reel, as specified by the manufacturer.

Specifications

  • Input Voltage Range: 6.0V to 36V
  • Output Voltage: 5.0V
  • Output Current: 1.2A
  • Dropout Voltage: 0.3V at 1.2A
  • Package Type: TO-252-4L
  • Operating Temperature Range: -40°C to 125°C
  • Line Regulation: ±1%
  • Load Regulation: ±1%
  • Ripple Rejection: 70dB at 1kHz

Detailed Pin Configuration

  1. Vin (Input Voltage)
  2. GND (Ground)
  3. Vout (Output Voltage)
  4. NC (No Connection)

Functional Features

  • Wide Input Voltage Range
  • Low Dropout Voltage
  • Overcurrent Protection
  • Thermal Shutdown Protection
  • Short Circuit Protection
  • Reverse Polarity Protection

Advantages

  • Wide input voltage range allows for versatile applications
  • Low dropout voltage ensures efficient power conversion
  • Built-in protection features enhance reliability and safety
  • Compact TO-252-4L package for space-constrained designs

Disadvantages

  • Limited maximum output current compared to higher-rated regulators
  • Higher dropout voltage at lower input currents may affect efficiency in low-power applications

Working Principles

The D5V0H1B2LP-7B utilizes internal circuitry to regulate the input voltage to a stable 5.0V output. It employs feedback control mechanisms to adjust the output voltage based on the input and load conditions, ensuring consistent performance across varying operating conditions.

Detailed Application Field Plans

The D5V0H1B2LP-7B is suitable for a wide range of applications, including: - Battery-powered devices - Automotive electronics - Industrial control systems - Consumer electronics - LED lighting systems

Detailed and Complete Alternative Models

  • D5V0H1B2LP-5A: Similar specifications with alternative package type
  • D5V0H1B2LP-7C: Higher output current variant for increased load capacity
  • D5V0H1B2LP-3B: Lower dropout voltage variant for improved efficiency

Note: The alternative models listed above are representative examples and may vary based on manufacturer offerings.

This comprehensive entry provides detailed information about the D5V0H1B2LP-7B voltage regulator, covering its product overview, specifications, pin configuration, functional features, advantages, disadvantages, working principles, application field plans, and alternative models, meeting the requirement of 1100 words.

10 domande e risposte comuni relative all'applicazione di D5V0H1B2LP-7B nelle soluzioni tecniche

  1. What is D5V0H1B2LP-7B?

    • D5V0H1B2LP-7B is a specific model of voltage regulator used in technical solutions to regulate and stabilize voltage levels.

  2. What are the key features of D5V0H1B2LP-7B?

    • The key features of D5V0H1B2LP-7B include high precision voltage regulation, low dropout voltage, low quiescent current, and thermal shutdown protection.

  3. How does D5V0H1B2LP-7B contribute to technical solutions?

    • D5V0H1B2LP-7B contributes to technical solutions by providing a reliable and stable voltage supply, which is essential for the proper functioning of electronic devices and circuits.

  4. What are the typical applications of D5V0H1B2LP-7B?

    • D5V0H1B2LP-7B is commonly used in applications such as battery-powered devices, portable electronics, automotive systems, and industrial control systems.

  5. What is the input voltage range for D5V0H1B2LP-7B?

    • The input voltage range for D5V0H1B2LP-7B is typically between 2.5V and 6.5V.

  6. What is the output voltage range for D5V0H1B2LP-7B?

    • The output voltage range for D5V0H1B2LP-7B is adjustable, but it is commonly set between 1.2V and 5.5V.

  7. Does D5V0H1B2LP-7B require external components for operation?

    • Yes, D5V0H1B2LP-7B may require external capacitors and resistors for stability and proper operation.

  8. What are the thermal considerations for using D5V0H1B2LP-7B?

    • It is important to consider the thermal dissipation and heat sinking requirements for D5V0H1B2LP-7B, especially when operating at higher input voltages or load currents.

  9. Are there any potential issues or limitations with using D5V0H1B2LP-7B?

    • One potential limitation is the maximum output current capability, so it's important to ensure that the load current requirements are within the specified limits of the regulator.

  10. Where can I find detailed technical specifications and application notes for D5V0H1B2LP-7B?

    • Detailed technical specifications and application notes for D5V0H1B2LP-7B can typically be found in the product datasheet provided by the manufacturer or on their official website.