Cypress Semiconductor Corp
L'immagine può essere rappresentativa.
Vedi le specifiche per i dettagli del prodotto.
CY7C68016A-56LFXC
vedi dettagli Schede tecniche

CY7C68016A-56LFXC

Product Overview

Category

The CY7C68016A-56LFXC belongs to the category of integrated circuits (ICs) and specifically falls under the family of USB microcontrollers.

Use

This product is primarily used for USB peripheral applications, providing a high-performance solution for various USB-based devices.

Characteristics

  • High-speed USB 2.0 compliant
  • Integrated 8051 microcontroller core
  • On-chip RAM and FIFO buffers
  • Flexible endpoint configuration
  • Low power consumption
  • Small form factor

Package

The CY7C68016A-56LFXC is available in a compact LQFP package, which stands for Low-profile Quad Flat Package. This package offers ease of handling and efficient heat dissipation.

Essence

The essence of the CY7C68016A-56LFXC lies in its ability to provide a complete USB solution with an integrated microcontroller, making it suitable for a wide range of USB peripheral applications.

Packaging/Quantity

The CY7C68016A-56LFXC is typically packaged in reels or trays, depending on the manufacturer's specifications. The quantity per reel or tray may vary but is commonly around 250 units.

Specifications

  • USB Compliance: USB 2.0
  • Microcontroller Core: 8051
  • Operating Voltage: 3.3V
  • Operating Temperature Range: -40°C to +85°C
  • Data Transfer Rate: Up to 480 Mbps
  • On-Chip Memory: 16 KB RAM
  • FIFO Buffer Size: 4 KB
  • Package Type: LQFP
  • Pin Count: 56

Detailed Pin Configuration

The CY7C68016A-56LFXC has a total of 56 pins, each serving a specific purpose. The pin configuration is as follows:

(Pin Number) (Pin Name) - (Description) 1 - VDD - Power supply voltage 2 - D+ - USB data line (positive) 3 - D- - USB data line (negative) 4 - GND - Ground 5 - XTAL1 - Crystal oscillator input 6 - XTAL2 - Crystal oscillator output 7 - RESET - Reset input 8 - INT0 - External interrupt 0 input 9 - INT1 - External interrupt 1 input 10 - PSEN - Program store enable 11 - ALE - Address latch enable 12 - EA - External access enable 13 - P0.0 - Port 0, Pin 0 14 - P0.1 - Port 0, Pin 1 15 - P0.2 - Port 0, Pin 2 16 - P0.3 - Port 0, Pin 3 17 - P0.4 - Port 0, Pin 4 18 - P0.5 - Port 0, Pin 5 19 - P0.6 - Port 0, Pin 6 20 - P0.7 - Port 0, Pin 7 21 - P1.0 - Port 1, Pin 0 22 - P1.1 - Port 1, Pin 1 23 - P1.2 - Port 1, Pin 2 24 - P1.3 - Port 1, Pin 3 25 - P1.4 - Port 1, Pin 4 26 - P1.5 - Port 1, Pin 5 27 - P1.6 - Port 1, Pin 6 28 - P1.7 - Port 1, Pin 7 29 - P2.0 - Port 2, Pin 0 30 - P2.1 - Port 2, Pin 1 31 - P2.2 - Port 2, Pin 2 32 - P2.3 - Port 2, Pin 3 33 - P2.4 - Port 2, Pin 4 34 - P2.5 - Port 2, Pin 5 35 - P2.6 - Port 2, Pin 6 36 - P2.7 - Port 2, Pin 7 37 - P3.0 - Port 3, Pin 0 38 - P3.1 - Port 3, Pin 1 39 - P3.2 - Port 3, Pin 2 40 - P3.3 - Port 3, Pin 3 41 - P3.4 - Port 3, Pin 4 42 - P3.5 - Port 3, Pin 5 43 - P3.6 - Port 3, Pin 6 44 - P3.7 - Port 3, Pin 7 45 -

10 domande e risposte comuni relative all'applicazione di CY7C68016A-56LFXC nelle soluzioni tecniche

Sure! Here are 10 common questions and answers related to the application of CY7C68016A-56LFXC in technical solutions:

  1. Question: What is the CY7C68016A-56LFXC?
    Answer: The CY7C68016A-56LFXC is a high-speed USB controller designed for easy integration into various applications.

  2. Question: What are the key features of the CY7C68016A-56LFXC?
    Answer: Some key features include a 16-bit wide data bus, 56 MHz operation frequency, USB 2.0 compliance, and support for multiple endpoints.

  3. Question: What are the typical applications of the CY7C68016A-56LFXC?
    Answer: This controller can be used in applications such as industrial automation, medical devices, test and measurement equipment, and data acquisition systems.

  4. Question: How does the CY7C68016A-56LFXC connect to a host device?
    Answer: It connects to a host device through a USB interface, providing a reliable and high-speed data transfer.

  5. Question: Can the CY7C68016A-56LFXC be used in both USB 2.0 and USB 3.0 applications?
    Answer: No, the CY7C68016A-56LFXC is specifically designed for USB 2.0 applications.

  6. Question: Does the CY7C68016A-56LFXC require external memory?
    Answer: Yes, it requires external memory for storing firmware and data.

  7. Question: What programming languages can be used to develop applications with the CY7C68016A-56LFXC?
    Answer: You can use C or C++ programming languages to develop applications with this controller.

  8. Question: Can the CY7C68016A-56LFXC be used in low-power applications?
    Answer: Yes, it supports low-power modes and can be used in energy-efficient designs.

  9. Question: Is the CY7C68016A-56LFXC compatible with different operating systems?
    Answer: Yes, it is compatible with various operating systems including Windows, Linux, and macOS.

  10. Question: Are there any development tools or software available for the CY7C68016A-56LFXC?
    Answer: Yes, Cypress provides a Software Development Kit (SDK) and other tools to assist in the development of applications using this controller.

Please note that these answers are general and may vary depending on specific requirements and implementation details.