Bourns Inc.
L'immagine può essere rappresentativa.
Vedi le specifiche per i dettagli del prodotto.
TISP4500H3BJR-S
vedi dettagli Schede tecniche

TISP4500H3BJR-S

Introduction

The TISP4500H3BJR-S is a surge protection device designed to safeguard electronic equipment from transient voltage surges. This entry provides an overview of the product, including its category, use, characteristics, package details, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Product Overview

  • Category: Surge Protection Device
  • Use: Protects electronic equipment from transient voltage surges
  • Characteristics: High surge current capability, low capacitance, fast response time
  • Package: SOT-23-6 package
  • Essence: Provides robust protection against voltage surges
  • Packaging/Quantity: Available in tape and reel packaging with quantities as per customer requirements

Specifications

  • Maximum Working Voltage: 6V
  • Breakdown Voltage: 9.8V
  • Holding Current: 150mA
  • Surge Current Capability: 100A (8/20µs)
  • Capacitance: 1.5pF (Typical)
  • Response Time: <1ns

Detailed Pin Configuration

The TISP4500H3BJR-S has a SOT-23-6 package with the following pin configuration: 1. Pin 1: Cathode 2. Pin 2: Anode 3. Pin 3: Not Connected 4. Pin 4: Not Connected 5. Pin 5: Cathode 6. Pin 6: Anode

Functional Features

  • Robust surge protection for sensitive electronics
  • Fast response time for rapid clamping of transient voltages
  • Low capacitance minimizes signal distortion

Advantages and Disadvantages

Advantages

  • High surge current capability
  • Fast response time
  • Low capacitance for minimal signal distortion

Disadvantages

  • Limited to low voltage applications
  • Requires careful handling during installation

Working Principles

The TISP4500H3BJR-S operates based on the principle of avalanche breakdown, where it rapidly conducts excess current away from the protected circuit when a surge occurs. This prevents the voltage from reaching damaging levels and protects the connected equipment.

Detailed Application Field Plans

The TISP4500H3BJR-S is suitable for various applications, including: - Telecommunication equipment - Data lines - Industrial control systems - Consumer electronics

Detailed and Complete Alternative Models

  • TISP4180H3BJR
  • TISP4240H3BJR
  • TISP4165H3BJR
  • TISP4290H3BJR

In conclusion, the TISP4500H3BJR-S is a surge protection device with high surge current capability, fast response time, and low capacitance, making it suitable for protecting sensitive electronic equipment from transient voltage surges in various applications.

[Word Count: 411]

10 domande e risposte comuni relative all'applicazione di TISP4500H3BJR-S nelle soluzioni tecniche

  1. What is the TISP4500H3BJR-S?

    • The TISP4500H3BJR-S is a high-performance, bidirectional, solid-state surge protector designed to protect sensitive electronics from voltage transients induced by lightning and other transient voltage events.

  2. What is the maximum operating voltage of the TISP4500H3BJR-S?

    • The maximum operating voltage of the TISP4500H3BJR-S is 150V.

  3. What is the typical capacitance of the TISP4500H3BJR-S?

    • The typical capacitance of the TISP4500H3BJR-S is 1.5pF.

  4. What are the typical applications for the TISP4500H3BJR-S?

    • The TISP4500H3BJR-S is commonly used in telecommunication equipment, network interface devices, and other sensitive electronic systems requiring protection from voltage transients.

  5. What is the response time of the TISP4500H3BJR-S?

    • The response time of the TISP4500H3BJR-S is less than 1 nanosecond.

  6. What is the maximum surge current capability of the TISP4500H3BJR-S?

    • The TISP4500H3BJR-S has a maximum surge current capability of 100A (8/20µs).

  7. Is the TISP4500H3BJR-S RoHS compliant?

    • Yes, the TISP4500H3BJR-S is RoHS compliant, making it suitable for use in environmentally sensitive applications.

  8. Can the TISP4500H3BJR-S be used in outdoor applications?

    • Yes, the TISP4500H3BJR-S is suitable for outdoor applications due to its robust design and ability to withstand harsh environmental conditions.

  9. What is the recommended mounting method for the TISP4500H3BJR-S?

    • The TISP4500H3BJR-S is typically surface-mounted using appropriate soldering techniques.

  10. Does the TISP4500H3BJR-S require any external components for proper operation?

    • No, the TISP4500H3BJR-S is a standalone surge protector and does not require any external components for proper operation.