Bourns Inc.
L'immagine può essere rappresentativa.
Vedi le specifiche per i dettagli del prodotto.
TIC226M-S
vedi dettagli Schede tecniche

TIC226M-S

Introduction

The TIC226M-S is a silicon controlled rectifier (SCR) belonging to the semiconductor category. It is widely used in various electronic applications due to its unique characteristics and functional features.

Basic Information Overview

  • Category: Semiconductor
  • Use: Power control in electronic circuits
  • Characteristics: High current capability, low forward voltage drop
  • Package: TO-220AB
  • Essence: Efficient power regulation
  • Packaging/Quantity: Typically sold in reels or tubes containing multiple units

Specifications

  • Voltage Rating: 600V
  • Current Rating: 8A
  • Gate Trigger Current: 200mA
  • Operating Temperature Range: -40°C to 125°C
  • Mounting Type: Through Hole

Detailed Pin Configuration

The TIC226M-S has a standard TO-220AB package with three pins: 1. Anode (A) 2. Cathode (K) 3. Gate (G)

Functional Features

  • High Current Capability: Capable of handling high currents for power applications.
  • Low Forward Voltage Drop: Minimizes power loss and enhances efficiency.
  • Reliable Gate Triggering: Ensures precise control over switching operations.

Advantages and Disadvantages

Advantages

  • Efficient power regulation
  • Reliable performance in high-current applications
  • Low power dissipation

Disadvantages

  • Sensitive to voltage transients
  • Requires careful heat management in high-power applications

Working Principles

The TIC226M-S operates as a controllable switch, allowing current flow when triggered by the gate signal. It regulates power by controlling the conduction angle of the load current.

Detailed Application Field Plans

The TIC226M-S finds extensive use in the following applications: - AC motor control - Lighting control systems - Power supplies - Heating control systems

Detailed and Complete Alternative Models

  • TIC236M-S: Higher current rating (12A)
  • TIC106D: Lower current rating (4A), suitable for lower power applications
  • TIC126M: Similar characteristics with different pin configuration

In conclusion, the TIC226M-S is a versatile semiconductor device with robust power control capabilities, making it an essential component in various electronic systems.

[Word count: 306]

10 domande e risposte comuni relative all'applicazione di TIC226M-S nelle soluzioni tecniche

  1. What is the TIC226M-S?

    • The TIC226M-S is a silicon controlled rectifier (SCR) designed for high performance and reliability in various technical applications.

  2. What are the key features of the TIC226M-S?

    • The TIC226M-S features a high surge capability, low holding current, and sensitive gate triggering, making it suitable for a wide range of technical solutions.

  3. In what technical solutions can the TIC226M-S be used?

    • The TIC226M-S is commonly used in motor control, power switching, lighting control, and other industrial and consumer applications.

  4. What is the maximum voltage and current rating of the TIC226M-S?

    • The TIC226M-S has a maximum voltage rating of [insert voltage] and a maximum current rating of [insert current], making it suitable for demanding technical solutions.

  5. How does the TIC226M-S handle thermal management?

    • The TIC226M-S is designed with efficient thermal management to ensure reliable operation under varying temperature conditions in technical solutions.

  6. What are the recommended mounting and heat sink considerations for the TIC226M-S?

    • Proper mounting on a suitable heat sink is essential for maximizing the performance and reliability of the TIC226M-S in technical solutions.

  7. Does the TIC226M-S require any special gate driving considerations?

    • The TIC226M-S may require specific gate driving considerations to ensure proper triggering and performance in different technical solutions.

  8. Are there any application notes or reference designs available for using the TIC226M-S in technical solutions?

    • Yes, application notes and reference designs are available to assist in the successful integration of the TIC226M-S into various technical solutions.

  9. What are the typical failure modes of the TIC226M-S and how can they be mitigated in technical solutions?

    • Understanding the typical failure modes and implementing appropriate protection measures can help mitigate potential issues when using the TIC226M-S in technical solutions.

  10. Where can I find additional technical support and resources for the TIC226M-S?

    • Additional technical support, datasheets, and resources for the TIC226M-S can be found on the manufacturer's website or by contacting their technical support team directly.