QD Devices Inc.
L'immagine può essere rappresentativa.
Vedi le specifiche per i dettagli del prodotto.
ADP8863ACPZ-R7
vedi dettagli Schede tecniche

ADP8863ACPZ-R7

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: LED Backlight Driver
  • Characteristics: High Efficiency, Programmable Dimming, Small Package Size
  • Package: LFCSP (Lead Frame Chip Scale Package)
  • Essence: Control and drive LEDs in backlight applications
  • Packaging/Quantity: Tape and Reel, 3000 units per reel

Specifications

  • Input Voltage Range: 2.7V to 5.5V
  • Output Current Range: Up to 30mA per channel
  • Number of Channels: 6
  • Dimming Control: PWM (Pulse Width Modulation)
  • Operating Temperature Range: -40°C to +85°C
  • Power Efficiency: Up to 90%
  • Protection Features: Overvoltage, Overcurrent, and Thermal Shutdown

Detailed Pin Configuration

The ADP8863ACPZ-R7 has a total of 20 pins. The pin configuration is as follows:

  1. VIN: Input voltage
  2. GND: Ground
  3. VOUT1: Output voltage for Channel 1
  4. VOUT2: Output voltage for Channel 2
  5. VOUT3: Output voltage for Channel 3
  6. VOUT4: Output voltage for Channel 4
  7. VOUT5: Output voltage for Channel 5
  8. VOUT6: Output voltage for Channel 6
  9. EN: Enable pin
  10. DIM: Dimming control input
  11. SDA: I2C data input
  12. SCL: I2C clock input
  13. NC: No connection
  14. NC: No connection
  15. NC: No connection
  16. NC: No connection
  17. NC: No connection
  18. NC: No connection
  19. NC: No connection
  20. NC: No connection

Functional Features

  • High efficiency LED backlight driver
  • Programmable dimming control
  • I2C interface for easy configuration
  • Overvoltage, overcurrent, and thermal shutdown protection
  • Low quiescent current in shutdown mode
  • Integrated fault detection and reporting

Advantages and Disadvantages

Advantages: - High power efficiency results in reduced power consumption - Programmable dimming allows for flexible brightness control - Small package size saves board space - Integrated fault detection enhances system reliability

Disadvantages: - Limited output current per channel (up to 30mA) - Requires an external microcontroller for advanced control

Working Principles

The ADP8863ACPZ-R7 is designed to control and drive LEDs in backlight applications. It operates by converting the input voltage into a regulated output voltage suitable for driving LEDs. The integrated circuit utilizes pulse width modulation (PWM) to control the brightness of the LEDs. By adjusting the duty cycle of the PWM signal, the desired brightness level can be achieved.

The IC also features an I2C interface, allowing for easy configuration and control of various parameters such as dimming levels and fault detection thresholds. Additionally, the ADP8863ACPZ-R7 incorporates protection features like overvoltage, overcurrent, and thermal shutdown to safeguard the LEDs and the IC itself from potential damage.

Detailed Application Field Plans

The ADP8863ACPZ-R7 is commonly used in various applications that require LED backlighting. Some of the typical application fields include:

  1. Mobile Devices: Smartphones, tablets, and portable gaming devices often utilize LED backlighting for their displays. The ADP8863ACPZ-R7 provides efficient and programmable control of the backlight, enhancing the user experience.

  2. Automotive Displays: LED backlights are widely used in automotive instrument clusters, infotainment systems, and head-up displays. The ADP8863ACPZ-R7's small package size and protection features make it suitable for automotive applications.

  3. Industrial Control Panels: LED backlighting is commonly employed in industrial control panels for improved visibility. The ADP8863ACPZ-R7's high efficiency and dimming control capabilities make it an ideal choice for such applications.

  4. Medical Devices: LED backlights are utilized in medical devices like patient monitors and diagnostic equipment. The ADP8863ACPZ-R7's reliability and fault detection features ensure consistent performance in critical healthcare environments.

Detailed and Complete Alternative Models

  1. ADP8860ACPZ-R7: Similar to the ADP8863ACPZ-R7, this IC is a 6-channel LED backlight driver with programmable dimming control. It offers comparable specifications and features.

  2. AP8802A: This IC is a 6-channel LED driver with integrated boost converter. It provides high power efficiency and supports both analog and PWM dimming control.

  3. LP8556B-Q1: Designed specifically for automotive applications, this IC is a 12-channel LED

10 domande e risposte comuni relative all'applicazione di ADP8863ACPZ-R7 nelle soluzioni tecniche

Sure! Here are 10 common questions and answers related to the application of ADP8863ACPZ-R7 in technical solutions:

  1. Q: What is ADP8863ACPZ-R7? A: ADP8863ACPZ-R7 is a highly integrated, programmable LED backlight driver IC designed for small-to-medium-sized LCD displays.

  2. Q: What are the key features of ADP8863ACPZ-R7? A: Some key features include 4-channel LED driver, I2C interface, PWM dimming control, fault detection, and programmable current sinks.

  3. Q: What is the maximum number of LEDs that can be driven by ADP8863ACPZ-R7? A: ADP8863ACPZ-R7 can drive up to 32 LEDs (8 LEDs per channel) with its 4-channel LED driver.

  4. Q: How is ADP8863ACPZ-R7 controlled? A: ADP8863ACPZ-R7 is controlled through an I2C interface, allowing for easy integration into various microcontroller-based systems.

  5. Q: Can ADP8863ACPZ-R7 support different LED configurations? A: Yes, ADP8863ACPZ-R7 supports various LED configurations, including series, parallel, or combination of both.

  6. Q: Does ADP8863ACPZ-R7 have built-in fault detection? A: Yes, ADP8863ACPZ-R7 has built-in fault detection mechanisms such as open/short circuit detection and over-temperature protection.

  7. Q: Can ADP8863ACPZ-R7 support dynamic backlight control? A: Yes, ADP8863ACPZ-R7 supports dynamic backlight control using PWM dimming, allowing for adjustable brightness levels.

  8. Q: What is the input voltage range for ADP8863ACPZ-R7? A: The input voltage range for ADP8863ACPZ-R7 is typically between 2.7V and 5.5V.

  9. Q: Is ADP8863ACPZ-R7 suitable for battery-powered applications? A: Yes, ADP8863ACPZ-R7 is designed to be highly efficient, making it suitable for battery-powered applications with low power consumption requirements.

  10. Q: Are there any evaluation boards or reference designs available for ADP8863ACPZ-R7? A: Yes, Analog Devices provides evaluation boards and reference designs that can help developers quickly prototype and integrate ADP8863ACPZ-R7 into their applications.

Please note that these answers are general and may vary depending on specific application requirements. It's always recommended to refer to the datasheet and application notes for detailed information.