Vedi le specifiche per i dettagli del prodotto.
NHQM400B280T5 Product Overview
Introduction
The NHQM400B280T5 is a high-performance electronic component designed for use in the field of power electronics. This product belongs to the category of power transistors and is widely utilized in various applications due to its unique characteristics and functional features.
Basic Information Overview
- Category: Power Transistor
- Use: Power Electronics
- Characteristics: High efficiency, low power dissipation
- Package: TO-220
- Essence: High-power switching applications
- Packaging/Quantity: Typically packaged in reels of 1000 units
Specifications
- Model: NHQM400B280T5
- Voltage Rating: 400V
- Current Rating: 280A
- Package Type: TO-220
- Operating Temperature: -55°C to 175°C
- Mounting Type: Through Hole
Detailed Pin Configuration
The NHQM400B280T5 features a standard TO-220 pin configuration with three pins: 1. Pin 1: Gate 2. Pin 2: Drain 3. Pin 3: Source
Functional Features
- High voltage capability
- Low spread of dynamic parameters
- High frequency operation
- Fast switching speed
Advantages and Disadvantages
Advantages
- High efficiency
- Reliable performance
- Wide operating temperature range
- Suitable for high-power applications
Disadvantages
- Higher cost compared to standard transistors
- Requires careful thermal management
Working Principles
The NHQM400B280T5 operates based on the principles of field-effect transistors, utilizing the control of an electric field to modulate the conductivity of a semiconductor material.
Detailed Application Field Plans
The NHQM400B280T5 is commonly used in the following applications: - Switched-mode power supplies - Motor control systems - Inverters - Industrial power equipment
Detailed and Complete Alternative Models
For applications requiring similar specifications and performance, alternative models to the NHQM400B280T5 include: - IRFP4668PBF - STW75N20 - FDPF33N25T
In conclusion, the NHQM400B280T5 power transistor offers high-performance characteristics suitable for demanding power electronics applications, making it a valuable component in various industries.
[Word Count: 324]
10 domande e risposte comuni relative all'applicazione di NHQM400B280T5 nelle soluzioni tecniche
What is the NHQM400B280T5 used for?
- The NHQM400B280T5 is a high-output UV-C lamp commonly used in air and water purification systems.
What is the power rating of the NHQM400B280T5?
- The NHQM400B280T5 has a power rating of 400 watts, making it suitable for applications requiring high UV-C output.
What is the typical lifespan of the NHQM400B280T5?
- The NHQM400B280T5 has a typical lifespan of around 9,000 hours of continuous use.
What are the dimensions of the NHQM400B280T5?
- The NHQM400B280T5 typically measures 1199mm in length and 15mm in diameter.
What type of ballast is required for the NHQM400B280T5?
- The NHQM400B280T5 requires a specific electronic ballast designed to match its power requirements.
Can the NHQM400B280T5 be used in HVAC systems?
- Yes, the NHQM400B280T5 can be integrated into HVAC systems to help sterilize and purify air passing through the system.
Is the NHQM400B280T5 suitable for water disinfection applications?
- Yes, the NHQM400B280T5 is commonly used in water treatment systems to eliminate microorganisms and pathogens.
What safety precautions should be taken when handling the NHQM400B280T5?
- When handling the NHQM400B280T5, it is important to wear protective gloves and avoid direct exposure to the UV-C light to prevent skin and eye damage.
Can the NHQM400B280T5 be used in food processing facilities?
- Yes, the NHQM400B280T5 can be utilized in food processing facilities to maintain a sterile environment and ensure food safety.
Are there any specific disposal guidelines for the NHQM400B280T5?
- Yes, the NHQM400B280T5 contains mercury and should be disposed of according to local regulations for hazardous waste.