Adesto Technologies
L'immagine può essere rappresentativa.
Vedi le specifiche per i dettagli del prodotto.
AT25DF512C-MAHN-Y
vedi dettagli Schede tecniche

AT25DF512C-MAHN-Y

Product Overview

Category

AT25DF512C-MAHN-Y belongs to the category of Serial Flash Memory.

Use

This product is primarily used for storing and retrieving digital data in electronic devices.

Characteristics

  • High storage capacity
  • Serial interface for easy integration
  • Low power consumption
  • Fast read and write operations
  • Reliable data retention

Package

AT25DF512C-MAHN-Y is available in a compact surface-mount package.

Essence

The essence of this product lies in its ability to provide non-volatile memory storage in a small form factor, making it suitable for various electronic applications.

Packaging/Quantity

AT25DF512C-MAHN-Y is typically packaged in reels or trays, with a quantity of [insert quantity].

Specifications

  • Memory Size: 512 kilobits (64 kilobytes)
  • Interface: Serial Peripheral Interface (SPI)
  • Voltage Range: 2.7V to 3.6V
  • Operating Temperature Range: -40°C to +85°C
  • Data Retention: Up to 20 years
  • Endurance: 100,000 program/erase cycles

Detailed Pin Configuration

  1. Chip Select (/CS)
  2. Serial Clock (SCK)
  3. Serial Data Input (SI/MOSI)
  4. Serial Data Output (SO/MISO)
  5. Write Protect (/WP)
  6. Hold (/HOLD)
  7. Power Supply (VCC)
  8. Ground (GND)

Functional Features

  • High-speed data transfer
  • Sector-based erase and program operations
  • Software and hardware protection mechanisms
  • Flexible write enable latch
  • Deep power-down mode for low-power operation

Advantages

  • Compact size allows for easy integration into space-constrained designs
  • Low power consumption extends battery life in portable devices
  • Fast read and write operations enhance overall system performance
  • Reliable data retention ensures long-term storage integrity

Disadvantages

  • Limited storage capacity compared to other memory technologies
  • Relatively higher cost per unit compared to traditional non-volatile memories

Working Principles

AT25DF512C-MAHN-Y utilizes the Serial Peripheral Interface (SPI) for communication with the host device. It stores data in non-volatile memory cells, which can be electrically programmed and erased. The SPI interface allows for high-speed data transfer between the memory and the host, enabling efficient read and write operations.

Detailed Application Field Plans

AT25DF512C-MAHN-Y finds applications in various electronic devices, including but not limited to: - Consumer electronics - Automotive systems - Industrial control systems - Medical devices - Communication equipment

Detailed and Complete Alternative Models

  1. AT25DF256C-MAHN-Y: 256 kilobits (32 kilobytes) memory size
  2. AT25DF1024C-MAHN-Y: 1024 kilobits (128 kilobytes) memory size
  3. AT25DF2048C-MAHN-Y: 2048 kilobits (256 kilobytes) memory size

These alternative models offer different memory sizes to cater to varying application requirements.

Word count: [insert word count]

10 domande e risposte comuni relative all'applicazione di AT25DF512C-MAHN-Y nelle soluzioni tecniche

Sure! Here are 10 common questions and answers related to the application of AT25DF512C-MAHN-Y in technical solutions:

  1. Q: What is the AT25DF512C-MAHN-Y? A: The AT25DF512C-MAHN-Y is a serial flash memory device manufactured by Adesto Technologies. It has a capacity of 512 kilobits (64 kilobytes) and operates on a Serial Peripheral Interface (SPI).

  2. Q: What are some typical applications for the AT25DF512C-MAHN-Y? A: The AT25DF512C-MAHN-Y is commonly used in various embedded systems, IoT devices, consumer electronics, industrial automation, and automotive applications where non-volatile storage is required.

  3. Q: What voltage levels does the AT25DF512C-MAHN-Y support? A: The AT25DF512C-MAHN-Y supports a wide voltage range from 2.7V to 3.6V, making it compatible with many different systems.

  4. Q: What is the maximum operating frequency of the AT25DF512C-MAHN-Y? A: The AT25DF512C-MAHN-Y can operate at frequencies up to 104 MHz, allowing for fast data transfer rates.

  5. Q: Does the AT25DF512C-MAHN-Y support hardware and software write protection? A: Yes, the AT25DF512C-MAHN-Y provides both hardware and software write protection features to prevent accidental or unauthorized modification of stored data.

  6. Q: Can the AT25DF512C-MAHN-Y be reprogrammed multiple times? A: Yes, the AT25DF512C-MAHN-Y supports over 100,000 erase/program cycles, ensuring its longevity and reliability in applications that require frequent data updates.

  7. Q: What is the typical power consumption of the AT25DF512C-MAHN-Y? A: The AT25DF512C-MAHN-Y has low power consumption, with an active current of around 10 mA during read operations and less than 1 µA in deep power-down mode.

  8. Q: Does the AT25DF512C-MAHN-Y have any built-in error correction mechanisms? A: No, the AT25DF512C-MAHN-Y does not have built-in error correction mechanisms. It is recommended to implement external error correction techniques if required for specific applications.

  9. Q: Can the AT25DF512C-MAHN-Y operate in extreme temperature conditions? A: Yes, the AT25DF512C-MAHN-Y is designed to operate reliably in a wide temperature range from -40°C to +85°C, making it suitable for harsh environments.

  10. Q: Is there any additional support or documentation available for the AT25DF512C-MAHN-Y? A: Yes, Adesto Technologies provides comprehensive datasheets, application notes, and technical support to assist users in integrating the AT25DF512C-MAHN-Y into their designs.