Vedi le specifiche per i dettagli del prodotto.
S-8353H30MC-IWPT2G
Product Overview
Category
S-8353H30MC-IWPT2G belongs to the category of voltage regulators.
Use
This product is used for regulating voltage in electronic circuits.
Characteristics
- High efficiency
- Low dropout voltage
- Wide input voltage range
- Overcurrent protection
- Thermal shutdown protection
Package
The S-8353H30MC-IWPT2G comes in a small surface-mount package.
Essence
The essence of this product lies in its ability to provide stable and regulated voltage to electronic devices.
Packaging/Quantity
The S-8353H30MC-IWPT2G is typically packaged in reels and each reel contains a specific quantity of units, usually 3000.
Specifications
- Input Voltage Range: 2.5V - 6.0V
- Output Voltage: 3.0V
- Output Current: 500mA
- Dropout Voltage: 200mV (typical)
- Quiescent Current: 40µA (typical)
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
- VIN: Input voltage pin
- GND: Ground pin
- EN: Enable pin
- VOUT: Output voltage pin
Functional Features
- High efficiency conversion
- Stable output voltage
- Overcurrent protection prevents damage to the circuit
- Thermal shutdown protection prevents overheating
Advantages
- Wide input voltage range allows for flexibility in various applications
- Low dropout voltage minimizes power loss
- Small package size saves board space
- Overcurrent and thermal protection enhance reliability
Disadvantages
- Limited output current may not be suitable for high-power applications
- Operating temperature range may restrict usage in extreme environments
Working Principles
The S-8353H30MC-IWPT2G is a linear voltage regulator that uses a feedback mechanism to maintain a constant output voltage. It adjusts the resistance between the input and output to regulate the voltage. When the input voltage exceeds the desired output voltage, the regulator reduces the resistance to lower the output voltage. Conversely, when the input voltage drops below the desired output voltage, the regulator increases the resistance to raise the output voltage.
Detailed Application Field Plans
The S-8353H30MC-IWPT2G can be used in various applications, including but not limited to: - Battery-powered devices - Portable electronic devices - IoT devices - Consumer electronics - Industrial equipment
Detailed and Complete Alternative Models
S-8353H33MC-IWPT2G
- Output Voltage: 3.3V
- Output Current: 500mA
- Dropout Voltage: 200mV (typical)
- Quiescent Current: 40µA (typical)
S-8353H25MC-IWPT2G
- Output Voltage: 2.5V
- Output Current: 500mA
- Dropout Voltage: 200mV (typical)
- Quiescent Current: 40µA (typical)
S-8353H28MC-IWPT2G
- Output Voltage: 2.8V
- Output Current: 500mA
- Dropout Voltage: 200mV (typical)
- Quiescent Current: 40µA (typical)
These alternative models provide similar functionality with different output voltages.
In conclusion, the S-8353H30MC-IWPT2G is a voltage regulator that offers high efficiency, low dropout voltage, and a wide input voltage range. It provides stable output voltage with overcurrent and thermal protection. While it has limitations in terms of output current and operating temperature range, it is suitable for various applications in the electronics industry. Alternative models with different output voltages are also available to meet specific requirements.
10 domande e risposte comuni relative all'applicazione di S-8353H30MC-IWPT2G nelle soluzioni tecniche
Sure! Here are 10 common questions and answers related to the application of S-8353H30MC-IWPT2G in technical solutions:
1. What is S-8353H30MC-IWPT2G? - S-8353H30MC-IWPT2G is a voltage regulator IC (integrated circuit) that provides a stable output voltage for various electronic devices.
2. What is the input voltage range of S-8353H30MC-IWPT2G? - The input voltage range of S-8353H30MC-IWPT2G is typically between 2.5V and 6.0V.
3. What is the output voltage of S-8353H30MC-IWPT2G? - The output voltage of S-8353H30MC-IWPT2G is fixed at 3.0V.
4. What is the maximum output current of S-8353H30MC-IWPT2G? - The maximum output current of S-8353H30MC-IWPT2G is 500mA.
5. Can S-8353H30MC-IWPT2G be used in battery-powered applications? - Yes, S-8353H30MC-IWPT2G can be used in battery-powered applications as it has a low quiescent current and supports low-power operation.
6. Does S-8353H30MC-IWPT2G have built-in protection features? - Yes, S-8353H30MC-IWPT2G includes overcurrent protection, thermal shutdown, and under-voltage lockout features to ensure safe operation.
7. Is S-8353H30MC-IWPT2G suitable for automotive applications? - Yes, S-8353H30MC-IWPT2G is AEC-Q100 qualified and can be used in automotive applications that require a stable 3.0V output voltage.
8. Can S-8353H30MC-IWPT2G operate in a wide temperature range? - Yes, S-8353H30MC-IWPT2G has an operating temperature range of -40°C to +85°C, making it suitable for various environments.
9. What package does S-8353H30MC-IWPT2G come in? - S-8353H30MC-IWPT2G is available in a small and compact SOT-23-5 package.
10. Are there any application notes or reference designs available for S-8353H30MC-IWPT2G? - Yes, the manufacturer provides application notes and reference designs that can help with the implementation of S-8353H30MC-IWPT2G in different technical solutions.
Please note that the answers provided here are general and may vary depending on the specific requirements and datasheet of S-8353H30MC-IWPT2G.