ABLIC U.S.A. Inc.
L'immagine può essere rappresentativa.
Vedi le specifiche per i dettagli del prodotto.
S-8352D30MC-K8PT2G
vedi dettagli Schede tecniche

S-8352D30MC-K8PT2G

Product Overview

Category

S-8352D30MC-K8PT2G belongs to the category of voltage regulators.

Use

This product is used to regulate and stabilize voltage levels in electronic circuits.

Characteristics

  • High precision voltage regulation
  • Low power consumption
  • Compact size
  • Wide input voltage range
  • Overcurrent protection
  • Thermal shutdown protection

Package

The S-8352D30MC-K8PT2G comes in a small surface-mount package, making it suitable for compact electronic devices.

Essence

The essence of this product lies in its ability to provide stable and regulated voltage output, ensuring proper functioning of electronic components.

Packaging/Quantity

The S-8352D30MC-K8PT2G is typically packaged in reels containing 3000 units.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 3.0V ± 1%
  • Output Current: Up to 200mA
  • Quiescent Current: 10µA (typical)
  • Dropout Voltage: 150mV @ 100mA
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The S-8352D30MC-K8PT2G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. CE: Chip enable pin
  4. VOUT: Output voltage pin

Functional Features

  • Voltage regulation: The S-8352D30MC-K8PT2G ensures a stable output voltage regardless of input voltage fluctuations.
  • Overcurrent protection: The device automatically shuts down when the output current exceeds the specified limit, protecting the circuit from damage.
  • Thermal shutdown protection: In case of excessive temperature, the regulator enters a shutdown mode to prevent overheating.

Advantages and Disadvantages

Advantages

  • High precision voltage regulation ensures reliable performance of electronic devices.
  • Low power consumption helps conserve energy.
  • Compact size allows for integration into space-constrained designs.
  • Wide input voltage range provides flexibility in various applications.

Disadvantages

  • Limited output current capacity may not be suitable for high-power applications.
  • Dropout voltage may cause a slight voltage drop across the regulator.

Working Principles

The S-8352D30MC-K8PT2G operates based on the principle of feedback control. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage despite changes in the input voltage or load conditions.

Detailed Application Field Plans

The S-8352D30MC-K8PT2G finds applications in various electronic devices, including but not limited to: - Portable consumer electronics - Battery-powered devices - IoT devices - Wearable devices - Industrial automation systems

Detailed and Complete Alternative Models

  1. S-8352D33MC-K8PT2G: Similar to S-8352D30MC-K8PT2G, but with an output voltage of 3.3V.
  2. S-8352D25MC-K8PT2G: Similar to S-8352D30MC-K8PT2G, but with an output voltage of 2.5V.
  3. S-8352D50MC-K8PT2G: Similar to S-8352D30MC-K8PT2G, but with an output voltage of 5.0V.

These alternative models provide options for different voltage requirements in various applications.

In conclusion, the S-8352D30MC-K8PT2G is a voltage regulator that offers high precision voltage regulation, low power consumption, and compact size. It is suitable for a wide range of applications in portable consumer electronics, battery-powered devices, IoT devices, wearable devices, and industrial automation systems. While it has limitations in terms of output current capacity and dropout voltage, it provides reliable voltage stabilization for electronic circuits.

10 domande e risposte comuni relative all'applicazione di S-8352D30MC-K8PT2G nelle soluzioni tecniche

Sure! Here are 10 common questions and answers related to the application of S-8352D30MC-K8PT2G in technical solutions:

  1. Q: What is the S-8352D30MC-K8PT2G? A: The S-8352D30MC-K8PT2G is a voltage regulator IC (integrated circuit) that provides a stable output voltage of 3.0V.

  2. Q: What is the input voltage range for this IC? A: The input voltage range for the S-8352D30MC-K8PT2G is typically between 2.5V and 6.0V.

  3. Q: What is the maximum output current it can handle? A: The S-8352D30MC-K8PT2G can handle a maximum output current of 300mA.

  4. Q: Can I use this IC in battery-powered applications? A: Yes, you can use the S-8352D30MC-K8PT2G in battery-powered applications as it has a low quiescent current and supports low-power operation.

  5. Q: Does this IC have built-in protection features? A: Yes, the S-8352D30MC-K8PT2G includes various protection features such as overcurrent protection, thermal shutdown, and reverse current protection.

  6. Q: Is this IC suitable for automotive applications? A: Yes, the S-8352D30MC-K8PT2G is designed to meet the requirements of automotive applications and is AEC-Q100 qualified.

  7. Q: Can I use this IC in my IoT devices? A: Absolutely! The S-8352D30MC-K8PT2G is well-suited for IoT devices due to its low power consumption and compact form factor.

  8. Q: What is the operating temperature range for this IC? A: The S-8352D30MC-K8PT2G has an operating temperature range of -40°C to +85°C, making it suitable for a wide range of environments.

  9. Q: Does this IC require any external components for operation? A: Yes, the S-8352D30MC-K8PT2G requires a few external components such as input/output capacitors and resistors for stability and filtering.

  10. Q: Can I use this IC in my audio applications? A: While the S-8352D30MC-K8PT2G can provide a stable voltage output, it may not be specifically optimized for audio applications. It is recommended to consult the datasheet or contact the manufacturer for specific audio-related requirements.

Please note that these answers are general and may vary depending on the specific application and requirements.