S-80917CNPF-G8MTFU

Product Overview

Category

S-80917CNPF-G8MTFU belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in electronic devices for voltage detection and reset functions.

Characteristics

• Voltage detection range: 1.2V to 6.0V
• Accuracy: ±1.0%
• Low supply current: 1.0μA (typical)
• Reset output type: N-channel open drain
• Operating temperature range: -40°C to +85°C

Package

The S-80917CNPF-G8MTFU is available in a small surface-mount package, specifically the SOT-23-5 package.

Essence

The essence of this product lies in its ability to accurately detect voltage levels and provide a reset signal when necessary, ensuring proper functioning of electronic devices.

Packaging/Quantity

The S-80917CNPF-G8MTFU is typically packaged in reels, with 3,000 units per reel.

Specifications

• Supply voltage range: 1.2V to 6.0V
• Detection voltage options: 2.0V, 2.3V, 2.5V, 2.6V, 2.7V, 2.8V, 2.9V, 3.0V, 3.1V, 3.2V, 3.3V, 3.4V, 3.5V, 3.6V, 3.7V, 3.8V, 3.9V, 4.0V, 4.1V, 4.2V, 4.3V, 4.4V, 4.5V, 4.6V, 4.7V, 4.8V, 4.9V, 5.0V, 5.5V
• Detection voltage accuracy: ±1.0%
• Supply current: 1.0μA (typical)
• Reset threshold hysteresis: 2.5% of detection voltage
• Output voltage low: 0.3V (max)
• Output current: 5mA (max)

Detailed Pin Configuration

The S-80917CNPF-G8MTFU has the following pin configuration:

```

---

| | --|----|-- |____| ```

Pin 1: GND (Ground) Pin 2: VDD (Supply Voltage) Pin 3: MR (Manual Reset) Pin 4: RESET (Reset Output) Pin 5: VOUT (Voltage Detection Output)

Functional Features

Voltage Detection

The S-80917CNPF-G8MTFU can accurately detect the voltage level within the specified range. It provides a reliable indication of the power supply status.

Reset Function

When the detected voltage falls below the preset threshold, the S-80917CNPF-G8MTFU generates a reset signal through its open-drain output pin. This signal can be used to reset microcontrollers or other digital circuits.

Low Power Consumption

With a supply current of only 1.0μA, this IC minimizes power consumption, making it suitable for battery-powered devices.

Advantages and Disadvantages

Advantages

• Wide voltage detection range
• Accurate voltage detection with low tolerance
• Low power consumption
• Small package size for space-constrained applications

Disadvantages

• Limited number of available detection voltage options
• Open-drain output requires external pull-up resistor for proper operation

Working Principles

The S-80917CNPF-G8MTFU operates by comparing the input voltage with a preset threshold. When the input voltage drops below this threshold, the reset output is activated, signaling a low voltage condition.

Detailed Application Field Plans

The S-80917CNPF-G8MTFU can be used in various applications, including but not limited to: - Battery-powered devices - Microcontroller-based systems - Power management circuits - Industrial control systems - Consumer electronics

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to the S-80917CNPF-G8MTFU include: - S-80915CNPF-G8XT2U - S-80918CNPF-G8YTFU - S-80919CNPF-G8ZTFU - S-80920CNPF-G82TFU

These alternatives provide comparable voltage detection and reset functions, catering to different voltage ranges and package options.

In conclusion, the S-80917CNPF-G8MTFU is an integrated circuit designed for accurate voltage detection and reset functions. Its low power consumption,