S-1004NB10I-M5T1U belongs to the category of electronic components.
This product is commonly used in electronic circuits and systems for various applications.
The S-1004NB10I-M5T1U comes in a compact package, suitable for surface mount technology (SMT) assembly.
The essence of this product lies in its ability to provide efficient and reliable electronic functionality within a small form factor.
The S-1004NB10I-M5T1U is typically packaged in reels or tape and reel packaging, with a quantity of 3000 units per reel.
The S-1004NB10I-M5T1U has the following pin configuration:
```
| | --| |-- |____| ```
Pin 1: Input Voltage (VIN) Pin 2: Ground (GND) Pin 3: Enable (EN) Pin 4: Output Voltage (VOUT) Pin 5: No Connection (NC)
The S-1004NB10I-M5T1U operates based on a step-up voltage conversion principle. It takes the input voltage (VIN) and boosts it to the desired output voltage (VOUT). The enable pin (EN) controls the operation of the device.
The S-1004NB10I-M5T1U finds applications in various fields, including but not limited to: - Portable electronic devices - Battery-powered systems - IoT devices - Wearable technology - Medical devices
These alternative models offer similar functionality with slight variations in specifications and package types.
In conclusion, the S-1004NB10I-M5T1U is a small-sized electronic component that provides efficient voltage conversion with low power consumption. Its wide operating temperature range and high reliability make it suitable for various applications. However, its limited output current and potential noise issues should be considered when selecting this product for specific designs.
Sure! Here are 10 common questions and answers related to the application of S-1004NB10I-M5T1U in technical solutions:
Q1: What is the voltage rating of S-1004NB10I-M5T1U? A1: The voltage rating of S-1004NB10I-M5T1U is 10V.
Q2: What is the maximum current that S-1004NB10I-M5T1U can handle? A2: S-1004NB10I-M5T1U can handle a maximum current of 100mA.
Q3: Is S-1004NB10I-M5T1U suitable for use in low-power applications? A3: Yes, S-1004NB10I-M5T1U is suitable for use in low-power applications due to its low current handling capability.
Q4: Can S-1004NB10I-M5T1U be used in automotive electronics? A4: No, S-1004NB10I-M5T1U is not recommended for use in automotive electronics as it does not meet the required specifications for automotive applications.
Q5: Does S-1004NB10I-M5T1U have reverse polarity protection? A5: No, S-1004NB10I-M5T1U does not have built-in reverse polarity protection. External circuitry may be required for reverse polarity protection.
Q6: What is the package type of S-1004NB10I-M5T1U? A6: S-1004NB10I-M5T1U comes in a SOT-23-5 package.
Q7: Can S-1004NB10I-M5T1U be used in high-temperature environments? A7: No, S-1004NB10I-M5T1U has a maximum operating temperature of 85°C and is not suitable for high-temperature environments.
Q8: Is S-1004NB10I-M5T1U RoHS compliant? A8: Yes, S-1004NB10I-M5T1U is RoHS compliant, meaning it does not contain hazardous substances.
Q9: What is the typical dropout voltage of S-1004NB10I-M5T1U? A9: The typical dropout voltage of S-1004NB10I-M5T1U is 0.15V at 100mA load current.
Q10: Can S-1004NB10I-M5T1U be used in battery-powered applications? A10: Yes, S-1004NB10I-M5T1U can be used in battery-powered applications due to its low dropout voltage and low current consumption.
Please note that these answers are based on general information about S-1004NB10I-M5T1U and may vary depending on specific application requirements. It is always recommended to refer to the datasheet and consult with technical experts for accurate and detailed information.